Material Properties:High impact resistance｜Flame retardant｜transparent｜Medium viscosity｜High temperature resistance｜ Medium viscosity
Application Areas:Household appliances｜Household appliances｜Electrical field｜Electronic field
Color:--
Grade:Injection grade

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	---	ASTM D-1238	7	g/10min
Water absorption rate	---	ASTM D-570	0.15	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	---	ASTM D-790	91	Mpa
Elongation at Break	---	ASTM D-638	90	%
Rockwell hardness	---	ASTM D-785	118	---
tensile strength	Break点，---	ASTM D-638	56	Mpa
tensile strength	tensile strength	Yield点，---	ASTM D-638	62	Mpa
Bending modulus	---	ASTM D-790	3250	Mpa
Impact strength of cantilever beam gap	23℃	ASTM D-256	640	J/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa	ASTM D-648	137	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	---	UL 94	V-0	---
UL flame retardant rating	UL flame retardant rating	---	UL 94	3.0	mm
Shrinkage rate	3.2mm	ASTM D-955	5-7	10
UL flame retardant rating	---	UL 94	V-2	---
UL flame retardant rating	UL flame retardant rating	---	UL 94	1.6	mm
density	---	ASTM D-792	1.21	---
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	1MHz	ASTM D-150	2.96	---
Dissipation factor	60Hz	ASTM D-150	0.0009	---
Dissipation factor	Dissipation factor	1MHz	ASTM D-150	0.01	---
Volume resistivity	---	ASTM D-257	1.0×10	Ω.cm
Dielectric constant	60Hz	ASTM D-150	3.01	---

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top