Material Properties:Good wear resistance｜Good wear resistance｜Medium to high viscosity｜Good wear resistance｜ good wear resistance｜ medium to high viscosity
Application Areas:--
Color:--
Grade:Injection grade

Technical Data Sheet Compare

Basic performance	Test Method	Test Result
Shrinkage rate	ASTM D955	0.50 %
Water absorption rate	ASTM D570	0.20 %
density	ASTM D792	1.58 g/cm³
melt mass-flow rate	ASTM D1238	6.5 g/10 min

Mechanical properties	Test Method	Test Result
tensile strength	ASTM D638	120 MPa
elongation	ASTM D638	2.0 %
Flexural modulus	ASTM D790	6680 MPa
bending strength	ASTM D790	157 MPa
Impact strength of cantilever beam gap	ASTM D256	57.0 J/m

Other performance	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	HB

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ASTM D257	1E+16 ohms
Volume resistivity		ASTM D257	1E+14 ohm·cm

Thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature (HDT)		ASTM D648	164 °C
melting temperature		ASTM D3418	165 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top