
PCTA Eastar™ Z6018 EASTMAN USA
3
- Unit Price:US$ 2,615 /MT
- Packaging Specification:
- Supply Quantity:205.5MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
+86 ********View
For more details, please contact the supplier!
Material Description
- Material Properties:High impact resistance| Extra high impact strength
- Application Areas:Food service sector|chip|Equivalent to PC|Can replace transparent ABS and PC in applications under non high temperature conditions.
- Color:--
- Grade:Injection grade
Material Certification

Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Intrinsic viscosity | 0.73 |
| Basic Performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 275℃,5kg | 23 g/10min |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTM D-790 | 9600 psi |
| Rockwell hardness | ASTM D-785 | 105 R | |
| Bending modulus | ASTM D-790 | 2.6×105 psi | |
| Elongation at Break | ASTM D-638 | 5/330 % | |
| Impact strength of cantilever beam gap | 23℃/-40℃ | ASTM D-256 | NB/1.2 ft-lb/in |
| Tensile stress | Yield | ASTM D-638 | 6500/7600 psi |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Vicat softening temperature | 1kg负荷 | ASTM D-1525 | 88 °C |
| Hot deformation temperature | 1.82MPa(264PSi) | ASTM D-648 | 65 °C |
| 0.45MPa(66PSi) | ASTM D-648 | 74 °C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.23 g/cm³ | |
| Transmittance rate | ASTM D-1003 | 89 % | |
| Shrinkage rate | 3.2mm(0.125in) | ASTM D-955 | 0.002-0.005 in/in |
| turbidity | ASTM D-1003 | 0.4 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.