TPEE RITEFLEX® 672 CELANESE USA
163
- Unit Price:US$ 3,533 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:40MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:High rigidity
- Application Areas:Automotive components｜High temperature hot plugging adhesive
- Color:--
- Grade:--
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Specific volume | ASTM D792 | 0.802 cm³/g | |
| melt mass-flow rate | ASTM D1238 | 10to15 g/10min | |
| ISO 1133 | 16 g/10min | ||
| Shrinkage rate | ASTM D955 | 2.0 % | |
| ISO 294-4 | 1.7-2.2 % | ||
| ISO 294-4 | 1.7-2.2 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 72 | |
| ISO 868 | 72 |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tear strength | Kg/m | 217.2 kN/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ISO 527-2/1A/50 | 28.0 Mpa | |
| ASTM D638 | 29.2 Mpa | ||
| ISO 527-2 | 40.0 Mpa | ||
| ISO 527-2 | 21.0 Mpa | ||
| ISO 527-2 | 27.0 Mpa | ||
| ISO 527-2 | 25.0 Mpa | ||
| Tensile strain | ISO 527-2/1A/50 | 19 % | |
| elongation | ASTM D638 | 300 % | |
| Nominal tensile fracture strain | ISO 527-2/1A/50 | >50 % | |
| Flexural modulus | ISO 178 | 2400 Mpa | |
| Tensile modulus | ASTM D638 | 635 Mpa | |
| ISO 527-2/1A/1 | 500 Mpa | ||
| Flexural modulus | ISO 178 | 450 Mpa | |
| bending strength | ISO 178 | 22.0 Mpa | |
| Taber wear resistance | ASTM D4060 | 30.0 mg | |
| RossFlex | 内部方法 | >1.0E+6 cycles |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | NoBreak | |
| ISO 179/1eU | NoBreak |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tear strength | ASTM D624 | 214 kN/m | |
| ISO 34-1 | 190 kN/m | ||
| compression set | ASTM D395 | <1.0 % | |
| Shore hardness | 内部方法 | 40 % | |
| ASTM D2632 | 40 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 2E+17 ohms | |
| dielectric strength | IEC 60243-1 | 28 KV/mm | |
| relative permittivity | IEC 60250 | 3.70 | |
| Dissipation Factor | IEC 60250 | 0.040 | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D1525 | 204 °C | |
| melting temperature | ASTM D3418 | 214 °C | |
| ISO 11357-3 | 215 °C | ||
| Linear coefficient of thermal expansion | ASTM D696 | 1.7E-04 cm/cm/°C | |
| ISO 11359-2 | 1.4E-04 cm/cm/°C | ||
| Heat distortion temperature | ISO 75-2/B | 118 °C | |
| Glass Transition Temperature | ASTM D3418 | -23.3 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top