Material Properties:Heat resistance performance｜Insulation｜Hydrolysis resistance｜Anti creep｜dimensional stability ｜Impact resistance｜Non-toxic｜Oil resistant｜Flame retardancy｜Resistance to stress cracking
Application Areas:Electrical and electronic fields｜Automotive sector｜Mechanical field｜Hot water field｜Coating
Color:--
Grade:Injection grade

Technical Data Sheet Compare

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	R级	ASTM D785	120

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	1.8MPa,未退火	ASTM D648	203 °C
Linear coefficient of thermal expansion	MD:-50到150°C	ASTM D696	5.5E-05 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD:50到150°C	ASTM D696	5.7E-05 cm/cm/°C

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	0.46mm	UL 94	V-0

Impact resistance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength	6.40mm	ASTM D256	无断裂

Physical properties	Test Condition	Test Method	Test Result
shrinkage rate	MD	ASTM D955	0.60 %
shrinkage rate	shrinkage rate	TD	ASTM D955	0.60 %
Water absorption rate	24hr	ASTM D570	0.43 %

Electrical performance	Test Condition	Test Method	Test Result
volume resistivity		ASTM D257	1E+17 ohms·cm
arc resistance		ASTM D495	70.0 sec

mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTM D638	84.0 Mpa
elongation	断裂	ASTM D638	60 %
flexural modulus		ASTM D790	2550 Mpa
bending strength		ASTM D790	129 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top