PC LEXAN™ EXL1414-WH9B578 SABIC INNOVATIVE KOREA
209
- Unit Price:US$ 3,369 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:30.6MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Processability｜Moderate liquidity｜Ductility｜copolymer｜Good demolding performance
- Application Areas:currency｜Electrical field｜Electronic field
- Color:--
- Grade:Injection grade
Material Certification
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt volume flow rate | ISO 1133 | 9.00 cm3/10min | |
| melt mass-flow rate | ASTM D1238 | 10 g/10 min | |
| Shrinkage rate | 内部方法 | 0.40 - 0.80 % | |
| 内部方法 | 0.40 - 0.80 % | ||
| Water absorption rate | ISO 62 | 0.35 % | |
| ISO 62 | 0.15 % | ||
| density | ASTM D792 | 1.18 g/cm³ | |
| ISO 1183 | 1.19 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 89 | |
| ASTM D785 | 121 |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot filament ignition temperature | IEC 60695-2-13 | 875 °C | |
| IEC 60695-2-13 | 875 °C | ||
| Burning wire flammability index | IEC 60695-2-12 | 960 °C | |
| IEC 60695-2-12 | 850 °C | ||
| UL flame retardant rating | UL 94 | HB |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dart impact | ASTM D3763 | 70.0 J | |
| Suspended wall beam without notch impact strength | ISO 180/1U | 无断裂 | |
| ISO 180/1U | 无断裂 | ||
| Impact strength of cantilever beam gap | ISO 180/1A | 70 kJ/m² | |
| ISO 180/1A | 60 kJ/m² | ||
| ASTM D256 | 870 J/m | ||
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| Impact strength of cantilever beam gap | ASTM D256 | 770 J/m | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| Charpy Notched Impact Strength | ISO 179/1eA | 70 kJ/m² | |
| ISO 179/1eA | 65 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ASTM D790 | 92.0 Mpa | |
| Flexural modulus | ISO 178 | 2250 Mpa | |
| bending strength | ISO 178 | 85.0 Mpa | |
| Flexural modulus | ASTM D790 | 2230 Mpa | |
| elongation | ISO 527-2/50 | 120 % | |
| Tensile modulus | ASTM D638 | 2020 Mpa | |
| ISO 527-2/1 | 2150 Mpa | ||
| tensile strength | ASTM D638 | 55.0 Mpa | |
| ISO 527-2/50 | 57.0 Mpa | ||
| ASTM D638 | 50.0 Mpa | ||
| ISO 527-2/50 | 60.0 Mpa | ||
| elongation | ASTM D638 | 6.0 % | |
| ISO 527-2/50 | 6.0 % | ||
| ASTM D638 | 98 % |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| screw speed | 40 to 70 rpm | ||
| Exhaust hole depth | 0.025 to 0.076 mm | ||
| Temperature | 70 to 95 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| Processing (melt) temperature | 295 to 315 °C | ||
| Temperature in the middle of the barrel | 280 to 305 °C | ||
| Temperature at the front of the material cylinder | 295 to 315 °C | ||
| Spray nozzle temperature | 290 to 310 °C | ||
| Suggested injection volume | 40 to 60 % | ||
| Temperature at the rear of the barrel | 270 to 295 °C | ||
| Suggested maximum moisture content | 0.020 % | ||
| drying temperature | 120 °C | ||
| drying time | 3.0 to 4.0 hr |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dissipation Factor | ASTM D150 | 9.3E-3 | |
| ASTM D150 | 1.2E-3 | ||
| dielectric constant | ASTM D150 | 2.64 | |
| ASTM D150 | 2.68 | ||
| dielectric strength | ASTM D149 | 16 KV/mm | |
| Volume resistivity | ASTM D257 | > 1.0E+15 ohms·cm | |
| Surface Resistivity | ASTM D257 | > 1.0E+15 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Linear coefficient of thermal expansion | ASTM E831 | 7.5E-5 cm/cm/°C | |
| RTI Imp | UL 746 | 120 °C | |
| RTI | UL 746 | 125 °C | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 7.2E-5 cm/cm/°C | |
| RTI Elec | UL 746 | 130 °C | |
| vicat | ISO 306/B120 | 146 °C | |
| ball-indentation hardness | IEC 60695-10-2 | 通过 | |
| Linear coefficient of thermal expansion | ASTM E831 | 7.0E-5 cm/cm/°C | |
| ISO 11359-2 | 7.2E-5 cm/cm/°C | ||
| vicat | ASTM D152510 | 145 °C | |
| Heat distortion temperature | ISO 75-2/Ae | 128 °C | |
| ASTM D648 | 124 °C | ||
| ISO 75-2/Be | 140 °C | ||
| ASTM D648 | 139 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top