Material Properties:transparent｜standard｜High mobility｜Good demolding performance
Application Areas:Electronic and electrical components｜Fitness equipment
Color:--
Grade:Injection grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	0.45MPa,未退火,6.40mm	ASTM D648	132 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,未退火,6.40mm	ASTM D648	128 °C
Linear coefficient of thermal expansion		ASTM D696	0.000060-0.000070 cm/cm/℃
UL flame retardant rating	1.60mm	UL 94	V-2

optical performance	Test Condition	Test Method	Test Result
transmissivity	总计,3000µm	ASTM D1003	85.0 %

Electrical performance	Test Condition	Test Method	Test Result
volume resistivity		ASTM D257	2.1E+16 ohm·cm
dielectric constant		ASTM D150	2.85

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	300℃/1.2kg	ASTM D1238	28 g/10min
shrinkage rate	MD：3.00mm	ASTM D955	0.40-0.80 %
Water absorption rate	24hr	ASTM D570	0.24 %

mechanical properties	Test Condition	Test Method	Test Result
Dart impact	3.20mm	ASTM D3029	65.0 J
Rockwell hardness	R计秤	ASTM D785	123
tensile strength	3.20mm	ASTM D638	62.0 Mpa
elongation	断裂，3.20mm	ASTM D638	100 %
flexural modulus	6.40mm	ASTM D790	2300 Mpa
bending strength	6.40mm	ASTM D790	87.0 Mpa
Impact strength of cantilever beam gap	3.20mm	ASTM D256	250 J/m

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top