Material Properties:high viscosity｜wear resistant｜transparent｜High mobility｜Weather resistance｜currency
Application Areas:Electrical field｜Electronic field｜Household appliances｜Household appliances｜Pump parts｜Vehicle electronics｜parts｜Engine parts｜bearing｜wheel｜Automotive External Parts｜Thin walled components｜Valves/valve components｜Parts under the hood of a car
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Method	Test Result
density	ISO 1183	1.41 g/cm³
melt mass-flow rate	ISO 1133	9.0 g/10min
Water absorption rate	ISO 62	0.30 %

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	HB

Mechanical properties	Test Method	Test Result
tensile strength	ISO 527-2	61.0 Mpa
Tensile strain	ISO 527-2	35 %
Flexural modulus	ISO 178	2600 Mpa
bending strength	ISO 178	90.0 Mpa
Tensile modulus	ISO 527-2	2600 Mpa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179/1eA	6.0 kJ/m²

Thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature (HDT)		ISO 75-2/A	95.0 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top