Impact strength of simply supported beam without notch
23°C
ISO 179
无断裂
flammability
Test Condition
Test Method
Test Result
UL flame retardant rating
0.75 mm
UL 94
V-2
UL flame retardant rating
0.44 mm
UL 94
V-2
UL flame retardant rating
3.0 mm
UL 94
HB
UL flame retardant rating
1.5 mm
UL 94
HB
mechanical properties
Test Condition
Test Method
Test Result
Tensile modulus
ISO 527-2
2300 Mpa
tensile strength
Yield
ISO 527-2
60.0 Mpa
Tensile strain
Break
ISO 527-2
110 %
Bending modulus
ISO 178
2300 Mpa
bending strength
ISO 178
92.0 Mpa
injection
Test Condition
Test Method
Test Result
Screw speed
60 to 100 rpm
Mold temperature
70 to 100 °C
Spray nozzle temperature
310 to 330 °C
Temperature at the front of the material cylinder
310 to 330 °C
Temperature in the middle of the barrel
290 to 310 °C
Temperature at the rear of the barrel
280 to 300 °C
drying time
4.0 to 6.0 hr
drying temperature
125 °C
thermal performance
Test Condition
Test Method
Test Result
Hot deformation temperature
1.8 MPa, Unannealed
ISO 75-2/Af
130 °C
Linear coefficient of thermal expansion
Flow
ISO 11359-2
7.0E-5 cm/cm/°C
Linear coefficient of thermal expansion
Across Flow
ISO 11359-2
7.0E-5 cm/cm/°C
Physical properties
Test Condition
Test Method
Test Result
melt mass-flow rate
300°C/1.2 kg
ISO 1133
4.0 g/10 min
Melt Volume Flow Rate (MVR)
300°C/1.2 kg
ISO 1133
4.00 cm3/10min
Shrinkage rate
Flow
Internal Method
0.50 - 0.70 %
Shrinkage rate
Across FlowFlow
Internal Method
0.50 - 0.70 %
Water absorption rate
24 hr, 23°C
ISO 62
0.20 %
Electrical performance
Test Condition
Test Method
Test Result
Surface resistivity
IEC 60093
> 1.0E+15 ohms
Volume resistivity
IEC 60093
3.0E+16 ohms·cm
Dielectric strength
1.00 mm
IEC 60243-1
31 KV/mm
Relative permittivity
2.00 mm, 100 Hz
IEC 60250
3.00
Relative permittivity
2.00 mm, 1 MHz
IEC 60250
3.00
Dissipation factor
2.00 mm, 100 Hz
IEC 60250
1.0E-3
Compared to the anti leakage trace index
IEC 60112
PLC 2
Dissipation factor
2.00 mm, 1 MHz
IEC 60250
0.090
hardness
Test Condition
Test Method
Test Result
Rockwell hardness
R -Sale
ISO 2039-2
118
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.