Material Properties:high strength｜Weather resistance｜UV resistance｜Low viscosity｜Good processability｜High liquidity｜Moderate heat resistance｜Good resilience｜Flame retardant performance
Application Areas:Automotive sector｜Electrical appliances
Color:--
Grade:Injection grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	0.45MPa,未退火,6.40mm	ASTM D648	152 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,未退火,6.40mm	ASTM D648	137 °C
Linear coefficient of thermal expansion		ASTM D696	0.000060-0.000070 cm/cm/℃
UL flame retardant rating	1.60mm	UL 94	V-2

optical performance	Test Condition	Test Method	Test Result
transmissivity	总计,3000µm	ASTM D1003	85.0 %

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	300℃/1.2kg	ASTM D1238	18 g/10min
shrinkage rate	MD：3.00mm	ASTM D955	0.40-0.80 %
Water absorption rate	24hr	ASTM D570	0.24 %

Electrical performance	Test Condition	Test Method	Test Result
volume resistivity		ASTM D257	2.1E+16 ohm·cm
dielectric constant		ASTM D150	2.85

mechanical properties	Test Condition	Test Method	Test Result
Rockwell hardness	R计秤	ASTM D785	123
tensile strength	3.20mm	ASTM D638	63.0 Mpa
elongation	断裂，3.20mm	ASTM D638	110 %
flexural modulus	6.40mm	ASTM D790	2350 Mpa
bending strength	6.40mm	ASTM D790	88.0 Mpa
Impact strength of cantilever beam gap	3.20mm	ASTM D256	830 J/m
Dart impact	3.20mm	ASTM D3029	>85.0 J

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top