PA66 Ultramid® A4H BASF GERMANY
219
- Unit Price:US$ 8,824 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:14MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Medium viscosity｜heat-resisting｜Oil resistant
- Application Areas:Laptop case｜wheel
- Color:--
- Grade:Injection grade
Material Certification
Technical Data Sheet
Compare
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ball-indentation hardness | 222.76to370.34 MPa |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat Deflection Temperature | HDT | ASTM D648/ISO 75 | 220 ℃（℉） |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 7-10 mm/mm.℃ | |
| （23-80）℃，干态 | 7-10 | ||
| thermal conductivity | 干态 | 0.23 W/(m.K) | |
| Heat Deflection Temperature | 0.45MPa负荷，干态 | 220 °C | |
| TEMPERATURE | 在20000h/5000h，后拉伸强度下降50%时 | 118/138 °C | |
| Heat Deflection Temperature | 1.8MPa负荷，干态 | 75 °C | |
| specific heat | 干态 | 1.7 J/(g.K) | |
| maximum service temperature | >200 °C | ||
| Continuous use temperature | °C | 110to220 | |
| 8.0Mpa, Not annealed | °C | 65to220 | |
| 1.8MPa, Not annealed | °C | 230to250 | |
| horizontal | mm/mm/°C | 68.6E-5-127.0E-5 | |
| flow | mm/mm/°C | 142.2E-5-203.2E-5 | |
| melting temperature | °C | 260 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23℃ | kJ/m² | 11.143to19.964 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| volume resistivity | 干/湿 | 10 Ω.cm | |
| dielectric strength | K20/P50，干/湿 | 110/80 KV/mm | |
| Surface Resistivity | 干/湿 | 10 Ω | |
| Compared to the Leakage Traceability Index (CTI) | 干/湿 | CTI 600 | |
| 干/湿 | CTI 575 M | ||
| loss angle | 1MHz，干/湿 | 0.025/0.2 | |
| dielectric constant | 1MHz，干/湿 | 3.2/5 | |
| dielectric strength | 23℃ | V/mil | 840 |
| volume resistivity | 23℃ | ohms·cm | 1.0E+12-1.0E+14 |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Saturation, 23 ℃ | % | 3.5to5.0 | |
| Balance, 23 ℃, 50% RH | % | 1.2to1.5 | |
| shrinkage rate | 23℃ | % | 0.10-0.31 |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | ASTM D638/ISO 527 | 4.2/20 % | |
| flexural modulus | ASTM D790/ISO 178 | 3000 kg·cm/cm(J/M)ft·lb/in | |
| Elongation at break | ASTM D638/ISO 527 | 4.2/20 % | |
| elongation | ≤0.5%, +23℃，湿 | 700 Mpa | |
| flexural modulus | 干/湿 | 3000 Mpa | |
| Fracture stress (V=50mm/min) | 干/湿 | 85/50 Mpa | |
| Tensile creep modulus | 1000h,湿 | 700 Mpa | |
| ball-indentation hardness | 干/湿 | 160/100 Mpa | |
| Tensile yield stress (V=50mm/min) | 干/湿 | 85/50 Mpa | |
| Elongation at break | 干/湿，V=50mm/min | 4.2/20 % | |
| Impact strength of cantilever beam gap | -30℃,干 | 7 KJ/m | |
| Impact Strength | +23℃，干/湿 | 50/>140 J | |
| Tensile modulus | 干/湿 | 3100/1200 Mpa | |
| Charpy Notched Impact Strength | +23℃，干/湿 | NB/NB KJ/m | |
| Impact strength of cantilever beam gap | +23℃，干/湿 | 5.5/NB KJ/m | |
| Elongation at break | 干/湿，V=50mm/min | 4.2/20 % | |
| Impact Strength | -20℃,干 | 20 J | |
| Charpy Notched Impact Strength | +23℃，干/湿字段1_文本 | 8/30 KJ/m | |
| tensile strength | 断裂,23℃ | 144.83to292.41 MPa | |
| Tensile modulus | 23℃ | 8206.9to28000.0 MPa | |
| Tensile strain | 断裂,23℃ | % | 1.9to3.1 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top