thermal performance	Test Method	Test Result
UL flame retardant rating	UL 94	1.1 mm
Linear coefficient of thermal expansion	E831	6.8×10 1/°C
Heat Deflection Temperature	ASTM D-648	137 °C
Long term use temperature	UL 746B	130 °C
vicat	ASTM D-1525	154 °C
UL flame retardant rating		HB
Heat Deflection Temperature	ASTM D-648	132 °C

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D-1238	10.5 g/10min

Mechanical properties	Test Method	Test Result
flexural modulus	ASTM D-790	2343 Mpa
tensile strength	ASTM D-638	62 Mpa
Elongation at break	ASTM D-638	130 %
Impact strength of cantilever beam gap	ASTM D-256	800 J/m
bending strength	ASTM D-790	96 Mpa
tensile strength	ASTM D-638	69 Mpa
Rockwell hardness	ASTM D-785	118

Electrical performance	Test Method	Test Result
Dissipation Factor	ASTM D-150	0.0009
dielectric constant	ASTM D-150	3.17
Dissipation Factor	ASTM D-150	0.01
dielectric constant	ASTM D-150	2.96
volume resistivity	ASTM D-257	1.0×10 ohm-cm

Physical properties	Test Method	Test Result
shrinkage rate	ASTM D-955	5-7 10
density	ASTM D-792	1.2
Water absorption rate	ASTM D-570	0.15

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top