PA66 Ultramid® A3W BASF GERMANY
278
- Unit Price:US$ 5,870 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:44MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
- Material Comparison:PA66 Ultramid® A3W BASF MALAYSIA
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Oil resistant｜Fast forming cycle｜High mobility｜heat-resisting
- Application Areas:wheel｜Engine parts｜Laptop case｜bearing
- Color:--
- Grade:Enhanced level
Material Certification
Technical Data Sheet
Compare
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| TEMPERATURE | 在20000h/5000h，后拉伸强度下降50%时 | 121/147 °C | |
| Linear coefficient of thermal expansion | （23-80）℃，干态 | 7-10 | |
| thermal conductivity | 干态 | 0.23 W/(m.K) | |
| maximum service temperature | >200 °C | ||
| specific heat | 干态 | 1.7 J/(g.K) | |
| Heat Deflection Temperature | 0.45MPa负荷，干态 | 220 °C | |
| 1.8MPa负荷，干态 | 75 °C | ||
| melting temperature | 260 ℃（℉） | ||
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.7-1 mm/mm.℃ |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| notes | 高机械强度、刚度和热稳定性.低温抗冲击性、滑动摩擦性 | ||
| characteristic | 多种工程部件和机械零件（如优质电绝缘材料）及多种特殊应用 |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | ≤0.5%, +23℃，湿 | 700 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric strength | K20/P50，干/湿 | 120/60 KV/mm | |
| Compared to the Leakage Traceability Index (CTI) | 干/湿 | CTI 500 | |
| volume resistivity | 干/湿 | 10 Ω.cm | |
| Compared to the Leakage Traceability Index (CTI) | 干/湿 | CTI 475 M | |
| loss angle | 1MHz，干/湿 | 0.025/0.2 | |
| dielectric constant | 1MHz，干/湿 | 3.5/7 | |
| Surface Resistivity | 干/湿 | 10 Ω | |
| volume resistivity | ASTM D257/IEC 60093 | 1E 13 Ω.cm |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1130 | |
| shrinkage rate | ASTM D955 | /0.85 % |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | +23℃，干/湿 | 5.5/NB KJ/m | |
| Fracture stress (V=50mm/min) | 干/湿 | 85/50 Mpa | |
| Tensile modulus | 干/湿 | 3000/1000 Mpa | |
| ball-indentation hardness | 干/湿 | 160/100 Mpa | |
| Impact Strength | +23℃，干/湿 | 75/>140 J | |
| Charpy Notched Impact Strength | +23℃，干/湿 | 6/20 KJ/m | |
| Tensile creep modulus | 1000h,湿 | 700 Mpa | |
| Elongation at break | 干/湿，V=50mm/min | 4.4/20 % | |
| Impact Strength | -20℃,干 | 30 J | |
| Tensile yield stress (V=50mm/min) | 干/湿 | 85/50 Mpa | |
| Charpy Notched Impact Strength | +23℃，干/湿 | NB/NB KJ/m | |
| Elongation at break | 干/湿，V=50mm/min | 4.4/20 % | |
| flexural modulus | 干/湿 | 3100 Mpa | |
| Impact strength of cantilever beam gap | -30℃,干 | 6 KJ/m | |
| Tensile modulus | ASTM D638/ISO 527 | 3000 kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ASTM D638/ISO 527 | 85屈服 kg/cm²(MPa)[Lb/in²] | |
| flexural modulus | ASTM D790/ISO 178 | 2900 kg·cm/cm(J/M)ft·lb/in |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top