PA66 Zytel® 101F DUPONT USA
416
- Unit Price:US$ 2,987 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:119.5MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
- Material Comparison:PA66 Zytel® 101F DUPONT SINGAPORE
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:High sliding｜wear resistant
- Application Areas:Electrical field｜Electronic field｜Engine parts
- Color:--
- Grade:Special level
Material Certification
Technical Data Sheet
Compare
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Effective thermal diffusivity coefficient | 5E-08 m²/s | ||
| Heat Deflection Temperature | 0.45MPa,未退火 | ISO 75-2/B | 190 °C |
| 1.8MPa,未退火 | ISO 75-2/A | 70.0 °C | |
| Glass Transition Temperature | ISO 11357-2 | 60.0 °C | |
| vicat | ISO 306/B50 | 240 °C | |
| melting temperature | ISO 11357-3 | 262 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 1E-04 cm/cm/°C |
| TD | ISO 11359-2 | 1.1E-04 cm/cm/°C |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-2 |
| 0.71mm | IEC 60695-11-10,-20 | V-2 | |
| 1.5mm | IEC 60695-11-10,-20 | V-2 | |
| Limiting Oxygen Index | ISO 4589-2 | 28 % | |
| FMVSS flammability | FMVSS302 | SE | |
| Fogging-G-value | condensate | ISO 6452 | 1E-04 g |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Emissions of Organic Compounds | VDA277 | 6.50 µgC/g | |
| Odor | VDA270 | 3.00 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 4.5 kJ/m² |
| 23°C | ISO 179/1eA | 6.0 kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 400 kJ/m² |
| 23°C | ISO 179/1eU | NoBreak | |
| Impact strength of cantilever beam gap | -40°C | ISO 180/1A | 5.5 kJ/m² |
| -30°C | ISO 180/1A | 6.0 kJ/m² | |
| 23°C | ISO 180/1A | 5.5 kJ/m² | |
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | 300 kJ/m² |
| 23°C | ISO 180/1U | 300 kJ/m² |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strain | Yield，MD | ISO 527-3 | 4.5 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| volume resistivity | IEC 60093 | 1E+15 ohms·cm | |
| dielectric strength | IEC 60243-1 | 32 KV/mm | |
| relative permittivity | 100Hz | IEC 60250 | 3.80 |
| 1MHz | IEC 60250 | 3.60 | |
| Dissipation Factor | 100Hz | IEC 60250 | 0.014 |
| 1MHz | IEC 60250 | 0.018 |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| MediumDensity | 0.970 g/cm³ | ||
| Ejection Temperature | 190 °C | ||
| SpecificHeatCapacity of Melt | 2790 J/kg/°C | ||
| ThermalConductivityofMelt | 0.16 W/m/K | ||
| density | ISO 1183 | 1.14 g/cm³ | |
| shrinkage rate | TD | ISO 294-4 | 1.4 % |
| TD:80°C,48hr | ISO 294-4 | 0.10 % | |
| MD | ISO 294-4 | 1.4 % | |
| MD:80°C,48hr | ISO 294-4 | 0.20 % | |
| Water absorption rate | 饱和,23°C,2.00mm | ISO 62 | 8.5 % |
| 平衡,23°C,2.00mm,50%RH | ISO 62 | 2.6 % | |
| viscosity number | ISO 307 | 140 cm³/g |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile creep modulus | 1hr | ISO 899-1 | -- Mpa |
| 1000hr | ISO 899-1 | -- Mpa | |
| flexural modulus | ISO 178 | 2800 Mpa | |
| Tensile modulus | ISO 527-2 | 3100 Mpa | |
| tensile strength | 屈服 | ISO 527-2 | 82.0 Mpa |
| Tensile strain | 屈服 | ISO 527-2 | 4.5 % |
| Nominal tensile fracture strain | ISO 527-2 | 20 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top