Other performance	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index		ASTM D2863	25	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	23	GEPJ	62.8	Mpa
Bending modulus	23	ASTM D-790	2200	Mpa
bending strength	23	ASTM D-790	93.2	Mpa
Impact strength of cantilever beam gap	23	ASTM D-256	764	J/m
Rockwell hardness		ASTM D648	70	M
Rockwell hardness	Rockwell hardness		ASTM D648	118	R
Suspended wall beam without notch impact strength	73℉	ASTM D4812	60.0	ft-lb/in
Impact strength of cantilever beam gap	73℉	ASTM D256	15.0	ft-lb/in
tensile strength	23	GEPJ	220	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	-30-+30	TMA	7
Vicat softening temperature		ASTM D1525	310	℉
Hot deformation temperature	1.82MPa	ASTM D-648	132
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	212℉	ASTM D570	0.58	%
Water absorption rate	Water absorption rate	73℉	ASTM D570	0.35	%
melt mass-flow rate		ASTM D1238	11	g/10min
Water absorption rate	23，24时间	ASTM D-570	0.15	%
Shrinkage rate	Flow	ASTM D-955	0.5-0.7	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	60Hz	ASTM D-150	3.2
Dissipation factor	60Hz	ASTM D-150	0.0009
Volume resistivity	23	ASTM D-257	10	Ω

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top