Material Properties:High mobility｜ Impact strength higher than PMMA｜Has high liquidity｜ Impact strength higher than PMMA｜Has high liquidity
Application Areas:Food service sector｜Products designed with K adhesive｜Small or point water outlet｜Products designed with K adhesive｜Small or point water outlet
Color:--
Grade:Injection grade

Material Certification

Technical Data Sheet Compare

physical property	Test Method	Test Result
density	ASTM D-792	1.19 g/cm
Haze ratio	ASTM D-1003	0.3 %
Shrinkage rate	ASTM D-955	0.002-0.006 in/in
transmittance	ASTM D-1003	91 %

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate			22.5 g/10min

Mechanical properties	Test Method	Test Result
Flexural modulus	ASTM D-790	2.9×105 psi
Tensile stress	ASTM D-638	7100/7500 psi
Impact strength of cantilever beam gap	ASTM D-256	1.5/0.8 ft-lb/in
Rockwell hardness	ASTM D-785	107 R
elongation at break	ASTM D-638	5/300 %
tensile strength	ASTM D-790	10000 psi

Other performance	Test Condition	Test Method	Test Result
intrinsic viscosity			0.62

Thermal performance	Test Method	Test Result
Heat distortion temperature	ASTM D-648	70/65 °C
vicat	ASTM D-1525	85 °C
Heat distortion temperature	ASTM D-648	65 °C
combustibility	UL 94	V-2

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top