PC LEXAN™ 923-BK1261 SABIC INNOVATIVE NANSHA
125
- Unit Price:US$ 2,656 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:20MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:High rigidity｜Weather resistance
- Application Areas:Communication equipment
- Color:--
- Grade:Flame retardant grade
Technical Data Sheet
Compare
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 70 |
| R级 | ASTM D785 | 118 |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| thermal conductivity | ASTMC177 | 0.19 W/m/K | |
| RTI Elec | UL 746 | 130 °C | |
| RTI Imp | UL 746 | 120 °C | |
| RTI | UL 746 | 130 °C | |
| Linear coefficient of thermal expansion | MD：-40到95°C | ASTME831 | 6.8E-05 cm/cm/°C |
| Heat Deflection Temperature | 1.8MPa,未退火,6.40mm | ASTM D648 | 132 °C |
| vicat | ASTM D15256 | 152 °C | |
| Heat Deflection Temperature | 0.45MPa,未退火,6.40mm | ASTM D648 | 138 °C |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Limiting Oxygen Index | ASTM D2863 | 35 % | |
| UL flame retardant rating | 1.47mm | UL 94 | V-0 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ASTM D4812 | 3200 J/m |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 640 J/m |
| ASTM D1822 | 525 kJ/m² | ||
| Dart impact | 23°C | ASTM D3029 | 169 J |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Outdoor applicability | UL 746C | f1 | |
| Water absorption rate | 平衡,100°C | ASTM D570 | 0.58 % |
| 平衡,23°C | ASTM D570 | 0.35 % | |
| shrinkage rate | MD：3.20mm | 内部方法 | 0.50-0.70 % |
| Water absorption rate | 24hr | ASTM D570 | 0.15 % |
| density | -- | ASTM D792 | 1.21 g/cm³ |
| -- | ASTM D792 | 1.22 g/cm³ | |
| Specific volume | ASTM D792 | 0.835 cm³/g | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 15 g/10min |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot wire ignition (HWI) | HWI | UL 746 | PLC 1 |
| High arc combustion index (HAI) | HAI | UL 746 | PLC 2 |
| High Voltage Arc Traceability Rate (HVTR) | HVTR | UL 746 | PLC 3 |
| dielectric strength | 3.20mm,inAir | ASTM D149 | 17 KV/mm |
| arc resistance | ASTM D495 | PLC7 | |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 3 |
| Dissipation Factor | 50Hz | ASTM D150 | 9E-04 |
| 60Hz | ASTM D150 | 9E-04 | |
| 1MHz | ASTM D150 | 0.010 | |
| dielectric constant | 50Hz | ASTM D150 | 3.01 |
| 60Hz | ASTM D150 | 3.01 | |
| 1MHz | ASTM D150 | 2.96 | |
| volume resistivity | ASTM D257 | >1.0E+17 ohms·cm |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Taber abraser | 1000Cycles,1000g,CS-17转轮 | ASTM D1044 | 10.0 mg |
| bending strength | 屈服,50.0mm跨距 | ASTM D790 | 91.0 Mpa |
| flexural modulus | 50.0mm跨距 | ASTM D790 | 2240 Mpa |
| elongation | 断裂 | ASTM D638 | 90 % |
| tensile strength | 断裂 | ASTM D638 | 55.8 Mpa |
| elongation | 屈服 | ASTM D638 | 7.0 % |
| tensile strength | 屈服 | ASTM D638 | 62.1 Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top