Material Properties:High temperature resistance｜transparent
Application Areas:Medical packaging｜Bottle cap｜Heat-resistant film｜Transparent tube rod｜Chemical resistant float｜Syringe
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
melting temperature		MCI方法	227 °C
melt mass-flow rate		ASTM D-1238	25 g/10min

Mechanical properties	Test Method	Test Result
tensile strength	ASTM D-638	21 Mpa
elongation	ASTM D-638	48 %
bending strength	ASTM D-790	34 Mpa
Elastic modulus	ASTM D-790	980 Mpa
Rockwell hardness	ASTM D-785	R73
Tensile modulus	ASTM D-638	1180 Mpa
Impact strength of cantilever beam gap	ASTM D-256	98 KJ/m
tensile strength	ASTM D-638	20 Mpa

Other performance	Test Method	Test Result
transmittance	ASTM D-1746	94 %
ambiguity	ASTM D-1746	0.7 %
refractive index	ASTM D-542	1.463 ND

Electrical performance	Test Method	Test Result
dielectric constant	ASTM D-150	2.12
Water absorption rate	ASTM D-570	0.01 %
Dielectric dissipation factor	ASTM D-150	0.015
Volume resistivity	ASTM D-257	>10 Ωcm
dielectric strength	ASTM D-149	65 KV/mm

Thermal performance	Test Method	Test Result
specific heat	ASTM C-351	0.47 cal/g℃
Heat distortion temperature	ASTM D-648	80 °C
Linear coefficient of thermal expansion	ASTM D-696	1.17*10 1/℃
thermal conductivity	ASTM BS-847A	4*10 calcm/seccm
vicat	ASTM D-1525	170 °C
Shrinkage rate	MCI方法	1.9/1.7 %
burning rate	ASTM D-635	2.54 cm/min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top