LCP SUMIKASUPER®  E6810 MR B SUMITOMO JAPAN

219
  • Unit Price:US$ 6,251 /MT
  • Packaging Specification:
    25 KG/PKG
  • Packaging Material:
    Paper bag
  • Supply Quantity:
    50MT
  • Delivery Terms:
    FOB
  • Port of Loading :
    China Main Port
  • Accepted Payment Methods:
    T/T
  • Shipping:
    Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View
serv********View

For more details, please contact the supplier!

Material Description

  • Material Properties:Dimensional stabilityLow warpageLow viscosityHigh elasticityHigh temperature strengthAging resistance
  • Application Areas:Electrical appliancesEngineering accessoriesAutomotive sectorFood containersElectronic fieldElectrical field
  • Color:--
  • Grade:Injection grade

Material Certification

UL

Technical Data Sheet Compare

hardnessTest ConditionTest MethodTest Result
Rockwell hardnessR 级ASTM D785103
thermal performanceTest ConditionTest MethodTest Result
Heat Deflection Temperature1.8 MPa, 未退火ASTM D648284 °C
Linear coefficient of thermal expansion流动 : 50 到 150°CASTM D6961.1E-5 cm/cm/°C
Linear coefficient of thermal expansion横向 : 50 到 150°CASTM D6966.5E-5 cm/cm/°C
RTI Elec3.2 mmUL 746220 °C
RTI Imp3.2 mmUL 746200 °C
RTI3.2 mmUL 746240 °C
flammabilityTest ConditionTest MethodTest Result
UL flame retardant rating0.30 mmUL 94V-0
Limiting Oxygen IndexASTM D286346 %
Impact resistanceTest ConditionTest MethodTest Result
Suspended wall beam without notch impact strength6.40 mmASTM D256280 J/m
Physical propertiesTest ConditionTest MethodTest Result
shrinkage rate流动ASTM D9550.22 %
shrinkage rate横向流动ASTM D9550.66 %
Water absorption rate饱和ASTM D5700.020 %
Electrical performanceTest ConditionTest MethodTest Result
volume resistivityASTM D2571.0E+15 ohms·cm
dielectric constant1 kHzASTM D1504.30
dielectric constant1 MHzASTM D1503.90
Dissipation Factor1 kHzASTM D1500.019
Dissipation Factor1 MHzASTM D1500.028
arc resistanceASTM D495130 sec
Compared to the Leakage Tracking Index (CTI)UL 746 V
injectionTest ConditionTest MethodTest Result
drying temperature120 to 150 °C
drying time3.0 hr
Suggested maximum material return ratio30 %
Temperature at the rear of the barrel300 to 320 °C
Temperature in the middle of the barrel320 to 350 °C
Temperature at the front of the material cylinder340 to 370 °C
Spray nozzle temperature340 to 370 °C
mold temperature70 to 160 °C
Injection Pressure78.0 to 157 Mpa
injection speed中等偏快
pressure holding20.0 to 39.0 Mpa
Back pressure0.980 to 4.90 Mpa
screw speed50 to 100 rpm
mechanical propertiesTest ConditionTest MethodTest Result
tensile strengthASTM D638126 Mpa
elongation断裂ASTM D6384.3 %
flexural modulus23°CASTM D79013500 Mpa
bending strength23°CASTM D790134 Mpa
shear strengthASTM D73250.0 Mpa
Poisson's ratioASTM E1320.39
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top