PC LEXAN™ XHT2141 BK1C141 SABIC INNOVATIVE US

215

Unit Price:US$ 7,066 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading :
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

+86 ********View

For more details, please contact the supplier!

Material Description

Material Properties:High mobility
Application Areas:Automotive sector
Color:--
Grade:Injection grade

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	9.0 kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	12 kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	无断裂
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C	ISO 180/1U	无断裂
Dart impact	23°C, Total Energy	ASTM D3763	68.0 J

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus	--2	ASTM D638	2600 Mpa
Tensile modulus	Tensile modulus	--	ISO 527-2/1	2600 Mpa
tensile strength	Yield3	ASTM D638	70.0 Mpa
	tensile strength	Yield	ISO 527-2/50	70.0 Mpa
		tensile strength	Break3	ASTM D638	60.0 Mpa
		tensile strength	tensile strength	Break	ISO 527-2/50	60.0 Mpa
elongation	Yield3	ASTM D638	6.5 %
	elongation	Yield	ISO 527-2/50	6.5 %
		elongation	Break3	ASTM D638	90 %
		elongation	elongation	Break	ISO 527-2/50	90 %
Bending modulus	50.0 mm Span4	ASTM D790	2550 Mpa
Bending modulus	Bending modulus	--5	ISO 178	2450 Mpa
bending strength	--5,6	ISO 178	100 Mpa
bending strength	bending strength	Yield, 50.0 mm Span4	ASTM D790	110 Mpa

injection	Test Condition	Test Method	Test Result
drying temperature			125 °C
drying time			4.0 to 6.0 hr
Suggested maximum moisture content			0.020 %
Suggested injection volume			40 to 60 %
Temperature at the rear of the barrel			270 to 330 °C
Temperature in the middle of the barrel			280 to 340 °C
Temperature at the front of the material cylinder			290 to 350 °C
Spray nozzle temperature			285 to 345 °C
Processing (melt) temperature			290 to 350 °C
Mold temperature			85 to 130 °C
Back pressure			0.300 to 0.700 Mpa
Screw speed			40 to 90 rpm
Exhaust hole depth			0.025 to 0.080 mm

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	0.45 MPa, Unannealed, 3.20 mm	ASTM D648	155 °C
	Hot deformation temperature	0.45 MPa, Unannealed, 4.00 mm, 64.0 mm Span9	ISO 75-2/Bf	155 °C
		Hot deformation temperature	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	145 °C
		Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span9	ISO 75-2/Af	142 °C
Vicat softening temperature	--	ASTM D152510	161 °C
	Vicat softening temperature	--	ISO 306/B50	160 °C
	Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	162 °C
Ball Pressure Test	123 to 127°C	IEC 60695-10-2	通过
Linear coefficient of thermal expansion	Flow : -40 to 40°C	ASTM E831	6.0E-5 cm/cm/°C
	Linear coefficient of thermal expansion	Across Flow : -40 to 40°C	ASTM E831	6.0E-5 cm/cm/°C
	Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow : -40°C	ISO 11359-2	6.0E-5 cm/cm/°C
thermal conductivity	25°C	ASTM C177	0.20 W/m/K
RTI Elec		UL 746	150 °C
RTI Imp		UL 746	130 °C
RTI		UL 746	150 °C

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	330°C/2.16 kg	ASTM D1238	46 g/10 min
Melt Volume Flow Rate (MVR)	330°C/2.16 kg	ISO 1133	43.0 cm3/10min
Shrinkage rate	3.20 mm，Flow	Internal Method	0.60 - 0.90 %
Water absorption rate	Saturation, 23°C	ISO 62	0.30 %
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.23 %

Electrical performance	Test Condition	Test Method	Test Result
Surface resistivity		ASTM D257	> 1.0E+17 ohms
Volume resistivity		ASTM D257	> 1.0E+17 ohms·cm
Dielectric strength	3.20 mm, in Oil	ASTM D149	23 KV/mm
Dissipation factor	100 Hz	ASTM D150	3.0
Dissipation factor	Dissipation factor	1 MHz	ASTM D150	3.1
Compared to the anti leakage trace index		UL 746	PLC 3
High arc combustion index		UL 746	PLC 0
Hot wire ignition		UL 746	PLC 3
Metallic haze	起始	Internal Method	155 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top

PC LEXAN™ XHT2141 BK1C141 SABIC INNOVATIVE US

Material Description

Technical Data Sheet Compare

Technical Data Sheet