PC LEXAN™ HP2-1H111 SABIC INNOVATIVE SINGAPHORE
255
Unit Price:$5108 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 17.5MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High mobility
- Application Areas:medical care medicine
- Color:--
- Grade:Medical grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.50to0.70 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.15 | % |
| Equilibrium,23°C | ASTMD570 | 0.35 | % | |
| Equilibrium,100°C | ASTMD570 | 0.58 | % | |
| Specific volume | ASTMD792 | 0.830 | cm³/g | |
| Melt mass flow rate | 300°C/1.2kg | ASTMD1238 | 18 | g/10min |
| Melt Volume-Flow Rate (MVR) | 300°C/1.2kg | ISO1133 | 16.0 | cm3/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | ASTMD638 | 2370 | Mpa | |
| ISO527-2/1 | 2350 | Mpa | ||
| tensile strength | Yield | ASTMD638 | 62.0 | Mpa |
| Yield | ISO527-2/50 | 63.0 | Mpa | |
| Break | ASTMD638 | 68.0 | Mpa | |
| Break | ISO527-2/50 | 65.0 | Mpa | |
| elongation | Yield | ASTMD638 | 7.0 | % |
| Yield | ISO527-2/50 | 6.0 | % | |
| Break | ASTMD638 | 130 | % | |
| Break | ISO527-2/50 | 100 | % | |
| Bending modulus | 50.0mmSpan | ASTMD790 | 2340 | Mpa |
| ISO178 | 2300 | Mpa | ||
| Bending strength 5, | ISO178 | 90.0 | Mpa | |
| bending strength | Yield,50.0mmSpan | ASTMD790 | 96.0 | Mpa |
| Taber abraser | 1000Cycles,1000g,CS-17Wheel | ASTMD1044 | 10.0 | mg |
| Suspended wall beam gap impact strength | -30°C | ISO180/1A | 10 | kJ/m² |
| 23°C | ISO180/1A | 12 | kJ/m² | |
| Dart impact equipped with measuring instruments | 23°C,EnergyatPeakLoad | ASTMD3763 | 62.0 | J |
| Falling hammer impact | 23°C | ASTMD3029 | 169 | J |
| Tensile impact strength | ASTMD1822 | 546 | kJ/m² | |
| Rockwell hardness | M-Sale | ASTMD785 | 70 | |
| R-Sale | ASTMD785 | 118 |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed,6.40mm | ASTMD648 | 137 | °C |
| thermal conductivity | ASTMC177 | 0.19 | W/m/K | |
| ISO8302 | 0.20 | W/m/K | ||
| RTIElec | UL746 | 130 | °C | |
| RTI Imp | UL746 | 130 | °C | |
| RTIStr | UL746 | 130 | °C | |
| Hot deformation temperature | 0.45MPa,Unannealed,100mmSpan | ISO75-2/Be | 133 | °C |
| 1.8MPa,Unannealed,6.40mm | ASTMD648 | 129 | °C | |
| 1.8MPa,Unannealed,100mmSpan | ISO75-2/Ae | 122 | °C | |
| vicat softening point | ASTMD152510 | 154 | °C | |
| -- | ISO306/B50 | 140 | °C | |
| -- | ISO306/B120 | 141 | °C | |
| Ball Pressure Test | 125°C | IEC60695-10-2 | Pass | |
| Linear coefficient of thermal expansion | MD：-40to95°C | ASTME831 | 6.8E-05 | cm/cm/°C |
| MD：23to80°C | ISO11359-2 | 7E-05 | cm/cm/°C | |
| specific heat | ASTMC351 | 1250 | J/kg/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Surface resistivity | IEC60093 | >1.0E+15 | ohms | |
| Volume resistivity | ASTMD257 | >1.0E+17 | ohms·cm | |
| IEC60093 | >1.0E+15 | ohms·cm | ||
| Dielectric strength | 3.20mm,inAir | ASTMD149 | 15 | KV/mm |
| 3.20mm,in Oil | IEC60243-1 | 17 | KV/mm | |
| Dielectric constant | 50Hz | ASTMD150 | 3.17 | |
| 60Hz | ASTMD150 | 3.17 | ||
| 1MHz | ASTMD150 | 2.96 | ||
| Relative permittivity | 50Hz | IEC60250 | 2.70 | |
| 60Hz | IEC60250 | 2.70 | ||
| 1MHz | IEC60250 | 2.70 | ||
| Dissipation factor | 50Hz | ASTMD150 | 9E-04 | |
| 60Hz | ASTMD150 | 9E-04 | ||
| 1MHz | ASTMD150 | 0.010 | ||
| 50Hz | IEC60250 | 1E-03 | ||
| 60Hz | IEC60250 | 1E-03 | ||
| 1MHz | IEC60250 | 0.010 | ||
| Compared to the anti leakage trace index | CTI | UL746 | PLC2 | |
| High arc combustion index | HAI | UL746 | PLC1 | |
| High voltage arc tracing rate | HVTR | UL746 | PLC2 | |
| Hot wire ignition | HWI | UL746 | PLC2 |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Refractive index | ASTMD542 | 1.586 | ||
| Light transmittance | 2540µm | ASTMD1003 | 88.0 | % |
| Haze | 2540µm | ASTMD1003 | 1.0 | % |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL94 | HB | |
| Extreme Oxygen Index | ISO4589-2 | 25 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top