ABS Novodur® HD M203FC WT018646 INEOS GERMANY
302
Unit Price:$5940 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High mobility
- Application Areas:medical care Shell Medical/nursing supplies
- Color:--
- Grade:Medical grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melt mass flow rate | 线性收缩率 | ISO294-4 | 0.4-0.7 | % |
| Melt Volume-Flow Rate (MVR) | 220°C/10.0kg | ISO1133 | 31.0 | cm3/10min |
| Shrinkage rate | ISO294-4 | 0.40to0.70 | % | |
| Melt mass flow rate | 220℃/10.0Kg | ISO1133 | 31 | g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO179 | 90 | kJ/m² |
| 23°C | ISO179 | 110 | kJ/m² | |
| Ball pressure hardness | ISO2039-1 | 105 | Mpa | |
| Tensile modulus | ISO527-2 | 2400 | Mpa | |
| tensile strength | Yield,23°C | ISO527-2 | 46.0 | Mpa |
| elongation | Yield,23°C | ISO527-2 | 2.6 | % |
| Break,23°C | ISO527-2 | >15 | % | |
| Bending modulus | ISO178 | 2400 | Mpa | |
| bending strength | ISO178 | 70.0 | Mpa | |
| Ball pressure hardness | ISO2039-1 | 110 | Mpa | |
| tensile strength | Yield，23°C | ISO527-2 | 46 | Mpa |
| elongation at break | Yield，23°C | ISO527-2 | 2.6 | % |
| 23°C | ISO527-2 | >=15 | % | |
| Tensile modulus | 23°C | ISO527-2 | 2400 | Mpa |
| bending strength | 23°C | ISO178 | 70 | Mpa |
| Bending modulus | 23°C | ISO178 | 2400 | Mpa |
| Impact strength of simply supported beam gap | 23°C | ISO179/1eA | 15 | kJ/m² |
| -30°C | ISO179/1eA | 7 | kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO179/1eU | 110 | kJ/m² |
| -30°C | ISO179/1eU | 90 | kJ/m² | |
| Impact strength of cantilever beam gap | 23°C | ISO180/1A | 15 | kJ/m² |
| -30°C | ISO180/1A | 7 | kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 0.45MPaUnannealed | ISO75-2/Bf | 98 | °C |
| 1.80MPaAnnealed | ISO75-2/Af | 94 | °C | |
| vicat softening point | 5.10kg | ISO306/A50 | 99 | °C |
| Hot deformation temperature | 0.45MPa,Annealed | ISO75-2/B | 98.0 | °C |
| 1.8MPa,Annealed | ISO75-2/A | 94.0 | °C | |
| vicat softening point | ISO306/B50 | 99.0 | °C | |
| Linear coefficient of thermal expansion | MD | ISO11359-2 | 9E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Dielectric constant | IEC60250 | 2.9 | 1MHz | |
| IEC60250 | 3 | 100HZ | ||
| Dissipation factor | IEC60250 | 0.05 | ||
| IEC60250 | 0.09 | |||
| 相对漏电起痕指数 | IEC60112 | 600 | V | |
| Volume resistance | IEC60093 | 1E+13 | Ω.cm | |
| Surface resistance | IEC60093 | 1E+15 | Ω.cm | |
| Insulation strength | 1.00mm | IEC60243-1 | 35 | KV/mm |
| Surface resistivity | IEC60093 | >1.0E+15 | ohms | |
| Volume resistivity | IEC60093 | >1.0E+15 | ohms·cm | |
| Electrical strength | 1.50mm | IEC60243-1 | 35 | KV/mm |
| Relative permittivity | 100Hz | IEC60250 | 3.00 | |
| 1MHz | IEC60250 | 2.90 | ||
| Dissipation factor | 100Hz | IEC60250 | 5E-03 | |
| 1MHz | IEC60250 | 9E-03 | ||
| Leakage Trace Index | IEC60112 | 600 | V |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melting temperature | ISO294 | 240 | °C | |
| Injection speed | ISO294 | 240 | mm/sec | |
| Combustion rate | ISO3795 | 60 | mm/min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top