PPO NORYL™ SE1X-GY6C258 SABIC INNOVATIVE SHANGHAI
112
Unit Price:$2827 USD/MT
- Packaging Specification:
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High temperature resistan Hydrolysis resistance
- Application Areas:Electronic and electrical Mechanical component cove Household products
- Color:--
- Grade:--
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | Flow : 3.20 mm | 内部方法 | 0.50 到 0.70 | % |
| Across Flow 2 | 内部方法 | 0.50 到 0.70 | % | |
| Water absorption rate | 24 hr | ASTM D570 | 0.060 | % |
| Outdoor applicability | UL 746C | f1 |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| tensile strength | Yield | ASTM D638 | 67.0 | Mpa |
| Break | ASTM D638 | 53.0 | Mpa | |
| Elongation rate | Yield | ASTM D638 | 8.1 | % |
| Break | ASTM D638 | 20 | % | |
| Bending modulus | 100 mm Span | ASTM D790 | 2500 | Mpa |
| bending strength | Yield, 100 mm Span | ASTM D790 | 102 | Mpa |
| Dart impact equipped with measuring instruments | -30°C, Energy at Peak | ASTM D3763 | 32.0 | J |
| 23°C, Energy at Peak | ASTM D3763 | 51.0 | J |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 0.45 MPa, Unannealed, 6.40 mm | ASTM D648 | 126 | °C |
| 1.8 MPa, Unannealed, 6.40 mm | ASTM D648 | 117 | °C | |
| RTI Elec | UL 746 | 110 | °C | |
| RTI Imp | UL 746 | 105 | °C | |
| RTI | UL 746 | 110 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Surface resistivity | ASTM D257 | > 1.0E+15 | ohms | |
| Volume resistivity | ASTM D257 | 2.3E+16 | ohms·cm | |
| Dielectric strength | 3.20 mm, in Oil | ASTM D149 | 18 | KV/mm |
| Dielectric constant | 60 Hz | ASTM D150 | 2.52 | |
| 50 kHz | ASTM D150 | 2.52 | ||
| 1 MHz | ASTM D150 | 2.46 | ||
| Dissipation factor | 50 Hz | ASTM D150 | 3.4E-3 | |
| 60 Hz | ASTM D150 | 3.4E-3 | ||
| 1 MHz | ASTM D150 | 2.1E-3 | ||
| Arc resistance | ASTM D495 | PLC 6 | ||
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 1 | ||
| High Voltage Arc Traceability Rate (HVTR) | UL 746 | PLC 4 |
| injection | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| drying temperature | 105 到 110 | °C | ||
| drying time | 3.0 到 4.0 | hr | ||
| Suggested maximum moisture content | 0.020 | % | ||
| Suggested injection volume | 30 到 70 | % | ||
| Temperature at the rear of the barrel | 250 到 300 | °C | ||
| Temperature in the middle of the barrel | 260 到 305 | °C | ||
| Temperature at the front of the material cylinder | 270 到 310 | °C | ||
| Spray nozzle temperature | 280 到 310 | °C | ||
| Processing (melt) temperature | 280 到 310 | °C | ||
| Mold temperature | 75 到 105 | °C | ||
| Back pressure | 0.300 到 0.700 | Mpa | ||
| Screw speed | 20 到 100 | rpm |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 1.5 mm | UL 94 | V-1 | |
| 6.0 mm | UL 94 | V-0 | ||
| Radiant Panel Listing | RP100 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top