PC LEXAN™ EXL9330-WH9G022 SABIC INNOVATIVE US

279

Unit Price:$5100 USD/MT

Packaging Specification:: 25 KG/PKG

Supply Quantity:: 100MT

Delivery Terms:: FOB

Port of Loading:: China Main Port

Accepted Payment Methods:: T/T

Shipping:: Negotiate supplier for shipping details

Transaction Guarantee:

Supplier Information

Dongguan Shengtai New Material Technology Co., Ltd.

+86 159****88View

3292********View

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:Flame retardant Toughening UV resistance
Application Areas:food Thin walled products Casters
Color:--
Grade:--

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result	Unit
Melt Volume-Flow Rate (MVR)	300°C/1.2 kg	ISO 1133	9.00	cm3/10min
Shrinkage rate	Flow : 3.20 mm	内部方法	0.40 到 0.80	%
Shrinkage rate	Shrinkage rate	Across Flow : 3.20 mm	内部方法	0.40 到 0.80	%
Water absorption rate	Saturation, 23°C	ISO 62	0.35	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.15	%
Outdoor applicability		UL 746C	f1
Outdoor applicability	Outdoor applicability		UL 746C	f1
Melt mass flow rate	300°C/1.2 kg	ASTM D1238	10	g/10 min

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Dart impact equipped with measuring instruments	23°C, Total Energy	ASTM D3763	52.0	J
Unscented Izod Impact Strength	-30°C	ISO 180/1U	无断裂
Unscented Izod Impact Strength	Unscented Izod Impact Strength	23°C	ISO 180/1U	无断裂
Impact strength of simply supported beam gap	-30°C	ISO 179/1eA	60	kJ/m²
Impact strength of simply supported beam gap	Impact strength of simply supported beam gap	23°C	ISO 179/1eA	75	kJ/m²
The impact strength of a simply supported beam without a notch is	-30°C	ISO 179/1eU	无断裂
	The impact strength of a simply supported beam without a notch is	23°C	ISO 179/1eU	无断裂
Ball pressure hardness	H 358/30	ISO 2039-1	90.0	Mpa
Tensile modulus	-- 2	ASTM D638	2100	Mpa
Tensile modulus	Tensile modulus	--	ISO 527-2/1	2100	Mpa
tensile strength	Yield 3	ASTM D638	58.0	Mpa
	tensile strength	Yield	ISO 527-2/50	55.0	Mpa
		tensile strength	Break 3	ASTM D638	61.0	Mpa
		tensile strength	tensile strength	Break	ISO 527-2/50	60.0	Mpa
elongation	Yield 3	ASTM D638	6.0	%
	elongation	Yield	ISO 527-2/50	6.0	%
		elongation	Break 3	ASTM D638	130	%
		elongation	elongation	Break	ISO 527-2/50	130	%
Bending modulus	50.0 mm Span 4	ASTM D790	2060	Mpa
Bending modulus	Bending modulus	-- 5	ISO 178	2200	Mpa
bending strength	-- 5, 6	ISO 178	85.0	Mpa
bending strength	bending strength	Yield, 50.0 mm Span 4	ASTM D790	88.0	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
vicat softening point	--	ASTM D152512, ISO 306/B12012	142	°C
vicat softening point	vicat softening point	--	ISO 306/B50	140	°C
RTI		UL 746	125	°C
RTI	RTI		UL 746	125	°C
RTI Imp		UL 746	115	°C
RTI Imp	RTI Imp		UL 746	115	°C
RTI Elec		UL 746	125	°C
RTI Elec	RTI Elec		UL 746	125	°C
Hot deformation temperature	0.45 MPa, Unannealed, 3.20 mm	ASTM D648	134	°C
	Hot deformation temperature	0.45 MPa, Unannealed, 4.00 mm, 100 mm Span 11	ISO 75-2/Be	135	°C
		Hot deformation temperature	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	120	°C
			Hot deformation temperature	1.8 MPa, Unannealed, 6.40 mm	ASTM D648	124	°C
			Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 100 mm Span 11	ISO 75-2/Ae	124	°C
Ball Pressure Test	123 to 127°C	IEC 60695-10-2	通过
Linear coefficient of thermal expansion	Flow : -40 to 40°C	ASTM E831	6.7E-5	cm/cm/°C
	Linear coefficient of thermal expansion	Flow : 23 to 80°C	ISO 11359-2	7.2E-5	cm/cm/°C
		Linear coefficient of thermal expansion	Across Flow : -40 to 40°C	ASTM E831	6.7E-5	cm/cm/°C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow : 23 to 80°C	ISO 11359-2	7.7E-5	cm/cm/°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Compared to the Leakage Tracking Index (CTI)		UL 746	PLC 3
Compared to the Leakage Tracking Index (CTI)	Compared to the Leakage Tracking Index (CTI)		UL 746	PLC 3
Hot wire ignition (HWI)		UL 746	PLC 1
Hot wire ignition (HWI)	Hot wire ignition (HWI)		UL 746	PLC 1
High arc combustion index (HAI)		UL 746	PLC 0
High arc combustion index (HAI)	High arc combustion index (HAI)		UL 746	PLC 0
Dissipation factor	50 Hz	ASTM D150	2.4E-3
	Dissipation factor	60 Hz	ASTM D150	2.4E-3
		Dissipation factor	1 MHz	ASTM D150, IEC 60250	8.5E-3
			Dissipation factor	50 Hz	IEC 60250	1.0E-3
			Dissipation factor	Dissipation factor	60 Hz	IEC 60250	1.0E-3
Dielectric strength	3.20 mm, in Oil	ASTM D149	17	KV/mm
Dielectric strength	Dielectric strength	3.20 mm, in Oil	IEC 60243-1	16	KV/mm
Leakage Trace Index		IEC 60112	225	V
Leakage Trace Index	Leakage Trace Index		IEC 60112	225	V
Surface resistivity		IEC 60093	> 1.0E+15	ohms
Surface resistivity	Surface resistivity		IEC 60093	> 1.0E+15	ohms
Dielectric constant	60 Hz	ASTM D150	2.95
	Dielectric constant	50 kHz	ASTM D150	2.95
		Dielectric constant	1 MHz	ASTM D150	2.90
			Dielectric constant	50 Hz	IEC 60250	2.60
				Dielectric constant	60 Hz	IEC 60250	2.60
				Dielectric constant	Dielectric constant	1 MHz	IEC 60250	2.70
Volume resistivity		IEC 60093	> 1.0E+15	ohms·cm
Volume resistivity	Volume resistivity		IEC 60093	> 1.0E+15	ohms·cm

injection	Test Condition	Test Result	Unit
drying temperature		120	°C
drying temperature	drying temperature		120	°C
Suggested maximum moisture content		0.020	%
Suggested maximum moisture content	Suggested maximum moisture content		0.020	%
Processing (melt) temperature		295 到 315	°C
Processing (melt) temperature	Processing (melt) temperature		295 到 315	°C
Mold temperature		70 到 95	°C
Mold temperature	Mold temperature		70 到 95	°C
drying time		3.0 到 4.0	hr
drying time	drying time		3.0 到 4.0	hr
Suggested injection volume		40 到 60	%
Suggested injection volume	Suggested injection volume		40 到 60	%
Temperature at the rear of the barrel		215 到 295	°C
Temperature at the rear of the barrel	Temperature at the rear of the barrel		215 到 295	°C
Temperature in the middle of the barrel		280 到 305	°C
Temperature in the middle of the barrel	Temperature in the middle of the barrel		280 到 305	°C
Temperature at the front of the material cylinder		295 到 315	°C
Temperature at the front of the material cylinder	Temperature at the front of the material cylinder		295 到 315	°C
Spray nozzle temperature		290 到 310	°C
Spray nozzle temperature	Spray nozzle temperature		290 到 310	°C
Back pressure		0.300 到 0.700	Mpa
Back pressure	Back pressure		0.300 到 0.700	Mpa
Screw speed		40 到 70	rpm
Screw speed	Screw speed		40 到 70	rpm
Exhaust hole depth		0.025 到 0.076	mm
Exhaust hole depth	Exhaust hole depth		0.025 到 0.076	mm

flammability	Test Condition	Test Method	Test Result	Unit
Burning wire flammability index	1.0 mm	IEC 60695-2-12	960	°C
Extreme Oxygen Index		ISO 4589-2	35	%
Extreme Oxygen Index	Extreme Oxygen Index		ISO 4589-2	35	%
Hot filament ignition temperature	1.0 mm	IEC 60695-2-13	825	°C
UL flame retardant rating	1.5 mm	UL 94	V-0
UL flame retardant rating	UL flame retardant rating	3.0 mm	UL 94	5VA

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Other Prices

Port of Loading	Unit Price
China Main Port	4424 USD/MT

Get App

Top