Physical	Test Condition	Test Method	Test Result
Melt Mass-Flow Rate	220°C/10.0 kg	ASTM D1238	7.0 g/10 min
Melt Mass-Flow Rate	Melt Mass-Flow Rate	260°C/5.0 kg	ASTM D1238	13 g/10 min
Modeling Shrinkage - Flow	3.20 mm	内部方法	0.50 到 0.70 %
Moisture Absorption	平衡, 23°C	ASTM D570	0.55 %
Outdoor Suitability		UL 746C	f2

Thermal Properties	Test Condition	Test Method	Test Result
Deflection Temperature Under Load?	0.45 MPa, 未退火, 3.20 mm	ASTM D648	87.0 °C
	Deflection Temperature Under Load?	0.45 MPa, 未退火, 6.40 mm	ASTM D648	90.0 °C
		Deflection Temperature Under Load?	1.8 MPa, 未退火, 3.20 mm	ASTM D648	76.0 °C
			Deflection Temperature Under Load?	1.8 MPa, 未退火, 6.40 mm	ASTM D648	79.0 °C
			Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8 MPa, 退火	ASTM D648	95.0 °C
Vicat Softening Temperature		ASTM D15256	99.0 °C
Linear thermal expansion coefficient	流动 : -30 到 0°C	ASTM E831	8.5E-5 cm/cm/°C
	Linear thermal expansion coefficient	流动 : -40 到 40°C	ASTM E831	8.6E-5 cm/cm/°C
		Linear thermal expansion coefficient	流动 : 0 到 100°C	ASTM E831	9.0E-5 cm/cm/°C
		Linear thermal expansion coefficient	Linear thermal expansion coefficient	横向 : -40 到 40°C	ASTM E831	9.2E-5 cm/cm/°C
RTI Elec		UL 746	50.0 °C
RTI Imp		UL 746	50.0 °C
RTI		UL 746	50.0 °C

Optical	Test Condition	Test Method	Test Result
Gardner	60°, 无织构	ASTM D523	95

Flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	1.5 mm	UL 94	HB

Mechanical Properties	Test Condition	Test Method	Test Result
Tensile Modulus		ASTM D638	1790 Mpa
Tensile Strength	屈服	ASTM D638	41.0 Mpa
Tensile Strength	Tensile Strength	断裂	ASTM D638	34.0 Mpa
Tensile Elongation	断裂	ASTM D638	40 %
Flexural Modulus	50.0 mm 跨距	ASTM D790	1790 Mpa
Flexural Strength	屈服, 50.0 mm 跨距	ASTM D790	58.0 Mpa

Electrical Properties	Test Condition	Test Method	Test Result
Surface Resistivity		ASTM D257	> 1.0E+15 ohms
Dielectric Strength	3.20 mm, in Oil	ASTM D149	16 KV/mm
Dielectric Constant	60 Hz	ASTM D150	5.20
	Dielectric Constant	50 kHz	ASTM D150	5.20
	Dielectric Constant	Dielectric Constant	1 MHz	ASTM D150	3.21
Dissipation Factor?	50 Hz	ASTM D150	0.15
	Dissipation Factor?	60 Hz	ASTM D150	0.15
	Dissipation Factor?	Dissipation Factor?	1 MHz	ASTM D150	0.026
Comparative Tracking Index		UL 746	PLC 0
High Amp Arc Ignition		UL 746	PLC 0
Hot-wire Ignition		UL 746	PLC 3

Hardness	Test Condition	Test Method	Test Result
Rockwell Hardness	R 级	ASTM D785	86

Impact Properties	Test Condition	Test Method	Test Result
Instrumented Dart Impact	23°C, Total Energy	ASTM D3763	25.0 J
Drop Impact Resistance		N	107 J/cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top