PET Rynite® 545 NC010 DUPONT USA
263
Unit Price:$3443 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 137.4MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:enhance Glass fiber reinforced High temperature resistan Short fiber reinforcement
- Application Areas:Fiber grade
- Color:--
- Grade:Enhanced level
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1690 | ||
| Shrinkage rate | ASTM D955 | 0.85 | % | |
| Water absorption rate 23 ℃/24h | ASTM D570/ISO 62 | 0.14 | % | |
| Top out temperature | 170 | °C | ||
| Melt Volume-Flow Rate (MVR) | 280°C/2.16kg | ISO1133 | 2.50 | cm3/10min |
| Shrinkage rate | TD | ISO294-4 | 0.80 | % |
| MD | ISO294-4 | 0.20 | % | |
| Water absorption rate | Saturation,23°C,2.00mm | ISO62 | 0.62 | % |
| Equilibrium,23°C,2.00mm,50%RH | ISO62 | 0.14 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | ISO527-2 | 15500 | Mpa | |
| tensile strength | Break | ISO527-2 | 182 | Mpa |
| elongation | Break | ISO527-2 | 2.0 | % |
| TensileCreepModule | 1hr | ISO899-1 | 15600 | Mpa |
| Tensile creep modulus | 1000hr | ISO899-1 | 13300 | Mpa |
| Bending modulus | ISO178 | 13500 | Mpa | |
| Impact strength of simply supported beam without notch | -30°C | ISO179/1eU | 40 | kJ/m² |
| 23°C | ISO179/1eU | 60 | kJ/m² | |
| Rockwell hardness | M-Sale | ISO2039-2 | 100 | |
| R-Sale | ISO2039-2 | 120 | ||
| Tensile modulus | ASTM D412/ISO 527 | 15500 | kg/cm²(MPa)[Lb/in²] | |
| Rockwell hardness | ASTM D785 | 100 | ||
| Bending modulus | ASTM D790/ISO 178 | 13500 | kg/cm²(MPa)[Lb/in²] |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Combustibility (rate) | UL94 | HB | ||
| Hot deformation temperature | ASTM D648/ISO 75 | 250 | ℃（℉） | |
| ASTM D648/ISO 75 | 226 | ℃（℉） | ||
| 1.8MPa,Unannealed | ISO75-2/A | 226 | °C | |
| 8.0MPa,Unannealed | ISO75-2/C | 180 | °C | |
| vicat softening point | ISO306/B50 | 230 | °C | |
| Melting temperature | ISO11357-3 | 252 | °C | |
| Linear coefficient of thermal expansion | MD | ISO11359-2 | 1.5E-05 | cm/cm/°C |
| TD | ISO11359-2 | 8.3E-05 | cm/cm/°C | |
| thermal conductivity | 0.32 | W/m/K | ||
| EffectiveThermalDiffusivity | 1.4E-07 | m²/s |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Surface resistivity | IEC60093 | 1E+14 | ohms | |
| Volume resistivity | IEC60093 | 1E+15 | ohms·cm | |
| Dielectric strength | IEC60243-1 | 32 | KV/mm | |
| Relative permittivity | 100Hz | IEC60250 | 4.50 | |
| 1MHz | IEC60250 | 4.40 | ||
| Dissipation factor | 100Hz | IEC60250 | 7E-03 | |
| 1MHz | IEC60250 | 0.011 | ||
| Compared to the anti leakage trace index | CTI | UL746 | PLC2 | |
| Leakage Trace Index | IEC60112 | 250 | V | |
| Surface resistivity | ASTM D257/IEC 60093 | 1.00E+14 | Ω | |
| Dielectric constant | ASTM D150/IEC 60250 | 4.5 | ||
| ASTM D150/IEC 60250 | 4.4 | |||
| Volume resistivity | ASTM D257/IEC 60093 | 1.00E+13 | Ω.cm |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Burning rate | 1.00mm | ISO3795 | <100 | mm/min |
| UL flame retardant rating | 0.75mm | UL94 | HB | |
| 1.5mm | UL94 | HB | ||
| 0.75mm | IEC60695-11-10,-20 | HB | ||
| 1.5mm | IEC60695-11-10,-20 | HB | ||
| Extreme Oxygen Index | ISO4589-2 | 20 | % | |
| FMVSS flammability | FMVSS302 | B | ||
| Fogging-G-value | condensate | ISO6452 | 0.0 | g |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top