Physical	Test Condition	Test Method	Test Result
Melt Viscosity		内部方法	110 Pa·s
Specific Volume		ASTMD792	0.770 cm³/g
Modeling Shrinkage	MD：--2	内部方法	0.90to1.6 %
	Modeling Shrinkage	MD：--3	内部方法	1.5to2.3 %
		Modeling Shrinkage	TD：--2	内部方法	1.0to1.7 %
		Modeling Shrinkage	Modeling Shrinkage	TD：--3	内部方法	1.6to2.4 %
Moisture Absorption	24hr	ASTMD570	0.080 %

Thermal Properties	Test Condition	Test Method	Test Result
Heat Deflection Temperature	0.45MPa,未退火,6.40mm	ASTMD648	154 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,未退火,6.40mm	ASTMD648	54.4 °C
Linear thermal expansion coefficient	MD：-40to40°C	ASTME831	8.1E-05 cm/cm/°C
Linear thermal expansion coefficient	Linear thermal expansion coefficient	MD：60to138°C	ASTME831	1.4E-04 cm/cm/°C

Mechanical Properties	Test Condition	Test Method	Test Result
Tensile Strength	屈服	ASTMD638	51.7 Mpa
Tensile Elongation	断裂	ASTMD638	10 %
Flexural Modulus	50.0mmSpan	ASTMD790	2340 Mpa
Flexural Strength	Yield,50.0mmSpan	ASTMD790	82.7 Mpa

Impact Properties	Test Condition	Test Method	Test Result
GardnerImpact6	23°C	ASTMD3029	40.7 J

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top