PC LEXAN™ 4701R GN8B062TNS SABIC INNOVATIVE NANSHA
125
Unit Price:$5048 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 20MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High temperature resistan transparent
- Application Areas:Electronic and electrical
- Color:--
- Grade:High liquidity level
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Specific volume | ASTM D792 | 0.830 | cm³/g | |
| Water absorption rate | 24 hr | ASTM D570 | 0.19 | % |
| Shrinkage rate - flow | 3.20 mm | 内部方法 | 0.80 到 1.0 | % |
| Melt mass flow rate | 300°C/1.2 kg | ASTM D1238 | 2.0 | g/10 min |
| 300°C/6.1 kg | ASTM D1238 | 9.0 | g/10 min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Non notched cantilever beam impact | 23°C | ASTM D4812 | 3200 | J/m |
| Tensile strength | Yield | ASTM D638 | 65.0 | Mpa |
| Break | ASTM D638 | 77.0 | Mpa | |
| Tensile impact strength | ASTM D1822 | 577 | kJ/m² | |
| elongation | Break | ASTM D638 | 78 | % |
| Rockwell hardness | M-Scale | ASTM D785 | 92 | |
| R-Scale | ASTM D785 | 127 | ||
| Bending modulus | 50.0 mm Span | ASTM D790 | 2330 | Mpa |
| bending strength | Yield, 50.0 mm Span | ASTM D790 | 97.0 | Mpa |
| Falling hammer impact | 23°C | ASTM D3029 | 149 | J |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| specific heat | ASTM C351 | 1260 | J/kg/°C | |
| thermal conductivity | ASTM C177 | 0.21 | W/m/K | |
| RTI | UL 746 | 130 | °C | |
| RTI Imp | UL 746 | 130 | °C | |
| RTI Elec | UL 746 | 130 | °C | |
| Hot deformation temperature | 1.8 MPa, Unannealed, 3.20 mm | ASTM D648 | 148 | °C |
| Linear coefficient of thermal expansion - flow | -40 to 95°C | ASTM E831 | 8.1E-5 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 3 | ||
| Hot wire ignition (HWI) | UL 746 | PLC 2 | ||
| High arc combustion index (HAI) | UL 746 | PLC 3 | ||
| Dissipation factor | 50 Hz | ASTM D150 | 1.6E-3 | |
| 60 Hz | ASTM D150 | 1.6E-3 | ||
| 100 Hz | ASTM D150 | 0.026 | ||
| Dielectric strength | 3.20 mm, in Air | ASTM D149 | 20 | KV/mm |
| Dielectric constant | 60 Hz | ASTM D150 | 3.27 | |
| 50 kHz | ASTM D150 | 3.27 | ||
| 1 MHz | ASTM D150 | 3.10 | ||
| Volume resistivity | ASTM D257 | > 2.5E+17 | ohms·cm | |
| High Voltage Arc Traceability Rate (HVTR) | UL 746 | PLC 3 | ||
| Arc resistance | ASTM D495 | PLC 6 |
| injection | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| drying temperature | 120 | °C | ||
| Suggested maximum moisture content | 0.020 | % | ||
| Processing (melt) temperature | 350 到 370 | °C | ||
| Mold temperature | 80 到 115 | °C | ||
| drying time | 3.0 到 4.0 | hr | ||
| Suggested injection volume | 40 到 60 | % | ||
| Temperature at the rear of the barrel | 325 到 350 | °C | ||
| Temperature in the middle of the barrel | 340 到 360 | °C | ||
| Temperature at the front of the material cylinder | 350 到 370 | °C | ||
| Spray nozzle temperature | 345 到 365 | °C | ||
| Back pressure | 0.300 到 0.700 | Mpa | ||
| Screw speed | 40 到 70 | rpm | ||
| Exhaust hole depth | 0.025 到 0.076 | mm |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Light transmittance | 2540 µm | ASTM D1003 | 85.0 | % |
| Refractive index | ASTM D542 | 1.600 | ||
| Haze | 2540 µm | ASTM D1003 | 1.0 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top