PC LEXAN™ EXL1494T NA8A005T SABIC INNOVATIVE NANSHA
119
Unit Price:$3521 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 18MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High mobility Ductility at low temperat Short molding cycle
- Application Areas:Electronic and Electrical Aerospace Applications lens
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melt mass flow rate | 300°C/1.2kg | ASTMD1238 | 10 | g/10min |
| Melt Volume-Flow Rate (MVR) | 300°C/1.2kg | ISO1133 | 9.00 | cm3/10min |
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.40to0.80 | % |
| TD：3.20mm | 内部方法 | 0.40to0.80 | % | |
| Water absorption rate | Saturation,23°C | ISO62 | 0.35 | % |
| Equilibrium,23°C,50%RH | ISO62 | 0.15 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | ASTMD638 | 2020 | Mpa | |
| ISO527-2/1 | 2150 | Mpa | ||
| tensile strength | Yield | ASTMD638 | 55.5 | Mpa |
| Yield | ISO527-2/50 | 57.0 | Mpa | |
| Impact strength of simply supported beam gap | -30°C | ISO179/1eA | 65 | kJ/m² |
| 23°C | ISO179/1eA | 70 | kJ/m² | |
| The impact strength of a simply supported beam without a notch is | -30°C | ISO179/1eU | NoBreak | |
| 23°C | ISO179/1eU | NoBreak | ||
| Suspended wall beam gap impact strength | -30°C | ISO180/1A | 60 | kJ/m² |
| 23°C | ISO180/1A | 70 | kJ/m² | |
| Unscented Izod Impact Strength | -30°C | ISO180/1U | NoBreak | |
| 23°C | ISO180/1U | NoBreak | ||
| Dart impact equipped with measuring instruments | 23°C,TotalEnergy | ASTMD3763 | 70.0 | J |
| Rockwell hardness | L-Sale | ASTMD785 | 89 | |
| R-Sale | ASTMD785 | 121 | ||
| tensile strength | Break | ASTMD638 | 50.3 | Mpa |
| Break | ISO527-2/50 | 60.0 | Mpa | |
| elongation | Yield | ASTMD638 | 6.0 | % |
| Yield | ISO527-2/50 | 6.0 | % | |
| Break | ASTMD638 | 98 | % | |
| Break | ISO527-2/50 | 120 | % | |
| Bending modulus | 50.0mmSpan | ASTMD790 | 2230 | Mpa |
| ISO178 | 2250 | Mpa | ||
| Bending strength 5, | ISO178 | 85.0 | Mpa | |
| bending strength | Yield,50.0mmSpan | ASTMD790 | 92.4 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Ball Pressure Test | 125°C | IEC60695-10-2 | Pass | |
| Linear coefficient of thermal expansion | MD：-40to40°C | ASTME831 | 7E-05 | cm/cm/°C |
| MD：23to80°C | ISO11359-2 | 7.2E-05 | cm/cm/°C | |
| TD：-40to40°C | ASTME831 | 7.5E-05 | cm/cm/°C | |
| TD：23to80°C | ISO11359-2 | 7.2E-05 | cm/cm/°C | |
| RTIElec | UL746 | 130 | °C | |
| RTI Imp | UL746 | 120 | °C | |
| RTIStr | UL746 | 125 | °C | |
| Hot deformation temperature | 0.45MPa,Unannealed,3.20mm | ASTMD648 | 139 | °C |
| 0.45MPa,Unannealed,100mmSpan | ISO75-2/Be | 140 | °C | |
| 1.8MPa,Unannealed,3.20mm | ASTMD648 | 124 | °C | |
| 1.8MPa,Unannealed,100mmSpan | ISO75-2/Ae | 128 | °C | |
| vicat softening point | ASTMD152510 | 145 | °C | |
| -- | ISO306/B50 | 145 | °C | |
| -- | ISO306/B120 | 146 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Dielectric strength | 0.800mm,inOil | ASTMD149 | 16 | KV/mm |
| Dielectric constant | 100Hz | ASTMD150 | 2.68 | |
| 1MHz | ASTMD150 | 2.64 | ||
| Dissipation factor | 100Hz | ASTMD150 | 1.2E-03 | |
| 1MHz | ASTMD150 | 9.3E-03 | ||
| Surface resistivity | ASTMD257 | >1.0E+15 | ohms | |
| Volume resistivity | ASTMD257 | >1.0E+15 | ohms·cm |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Burning wire flammability index | 0.8mm | IEC60695-2-12 | 850 | °C |
| 1.0mm | IEC60695-2-12 | 960 | °C | |
| Hot filament ignition temperature | 1.0mm | IEC60695-2-13 | 875 | °C |
| 3.0mm | IEC60695-2-13 | 875 | °C | |
| Extreme Oxygen Index | ISO4589-2 | 37 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top