PC LEXAN™ HP4-1H111 SABIC INNOVATIVE US
141
- Unit Price:$5347 USD/MT
- Packaging Specification:25 KG/PKG
- Supply Quantity:10MT
- Delivery Terms:FOB
- Port of Loading:China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High mobility
- Application Areas:medical care｜medicine｜Medical/nursing supplies
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| Physical | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Specific Volume | ASTMD792 | 0.830 cm³/g | |
| Melt Mass-Flow Rate | 300°C/1.2kg | ASTMD1238 | 11 g/10min |
| Melt Volume flow Rate | 300°C/1.2kg | ISO1133 | 10.0 cm3/10min |
| Modeling Shrinkage | MD：3.20mm | 内部方法 | 0.50to0.70 % |
| Moisture Absorption | 24hr | ASTMD570 | 0.15 % |
| 平衡,23°C | ASTMD570 | 0.35 % | |
| 平衡,100°C | ASTMD570 | 0.58 % |
| Thermal Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Vicat Softening Temperature | ASTMD152510 | 154 °C | |
| -- | ISO306/A50 | 153 °C | |
| -- | ISO306/B50 | 141 °C | |
| -- | ISO306/B120 | 142 °C | |
| Ball PressureTest | 125°C | IEC60695-10-2 | Pass |
| Linear thermal expansion coefficient | MD：-40到95°C | ASTME831 | 6.8E-05 cm/cm/°C |
| MD：23到80°C | ISO11359-2 | 7E-05 cm/cm/°C | |
| Specific Heat | ASTMC351 | 1250 J/kg/°C | |
| Thermal Conductivity | ASTMC177 | 0.19 W/m/K | |
| ISO8302 | 0.20 W/m/K | ||
| Heat Deflection Temperature | 0.45MPa,未退火,6.40mm | ASTMD648 | 137 °C |
| 0.45MPa,Unannealed,100mmSpan | ISO75-2/Be | 136 °C | |
| 1.8MPa,未退火,6.40mm | ASTMD648 | 132 °C | |
| 1.8MPa,Unannealed,100mmSpan | ISO75-2/Ae | 125 °C | |
| RTIElec | UL746 | 130 °C | |
| Evolution Calendar intelligent importer | UL746 | 130 °C | |
| RTIStr | UL746 | 130 °C |
| Optical | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Index of Refraction | ASTMD542 | 1.586 | |
| Transmittance | 2540µm | ASTMD1003 | 88.0 % |
| Haze | 2540µm | ASTMD1003 | 1.0 % |
| Flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flame Rating | 1.5mm | UL94 | HB |
| Oxygen Index | ASTMD2863 | 25 % | |
| ISO4589-2 | 25 % |
| Mechanical Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural Modulus | ISO178 | 2300 Mpa | |
| Flexural Strength | ISO178 | 90.0 Mpa | |
| 屈服,50.0mm跨距 | ASTMD790 | 97.0 Mpa | |
| Taber Abrasion Resistance | 1000Cycles,1000g,CS-17转轮 | ASTMD1044 | 10.0 mg |
| Tensile Modulus | ASTMD638 | 2370 Mpa | |
| ISO527-2/1 | 2350 Mpa | ||
| Tensile Strength | 屈服 | ASTMD638 | 62.0 Mpa |
| Tensile Stress | 屈服 | ISO527-2/50 | 63.0 Mpa |
| Tensile Strength | 断裂 | ASTMD638 | 68.0 Mpa |
| Tensile Stress | 断裂 | ISO527-2/50 | 70.0 Mpa |
| Tensile Elongation | 屈服 | ASTMD638 | 7.0 % |
| Tensile Strain | 屈服 | ISO527-2/50 | 6.0 % |
| Tensile Elongation | 断裂 | ASTMD638 | 130 % |
| Tensile Strain | 断裂 | ISO527-2/50 | 110 % |
| Flexural Modulus | 50.0mm跨距 | ASTMD790 | 2340 Mpa |
| Electrical Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Comparative Tracking Index | CTI | UL746 | PLC 2 |
| High Amp Arc Ignition | HAI | UL746 | PLC 1 |
| High Voltage Arc Tracking Rate | HVTR | UL746 | PLC 2 |
| Hot-wire Ignition | HWI | UL746 | PLC 2 |
| Dielectric Constant | 1MHz | ASTMD150 | 2.96 |
| Relative Permittivity | 50Hz | IEC60250 | 2.70 |
| 60Hz | IEC60250 | 2.70 | |
| 1MHz | IEC60250 | 2.70 | |
| Dissipation Factor? | 50Hz | ASTMD150 | 9E-04 |
| 60Hz | ASTMD150 | 9E-04 | |
| 1MHz | ASTMD150 | 0.010 | |
| 50Hz | IEC60250 | 1E-03 | |
| 60Hz | IEC60250 | 1E-03 | |
| 1MHz | IEC60250 | 0.010 | |
| Surface Resistivity | IEC60093 | >1.0E+15 ohms | |
| Volume Resistivity | ASTMD257 | >1.0E+17 ohms·cm | |
| IEC60093 | >1.0E+15 ohms·cm | ||
| Dielectric Strength | 3.20mm,inAir | ASTMD149 | 15 KV/mm |
| 3.20mm,在油中 | IEC60243-1 | 17 KV/mm | |
| Dielectric Constant | 50Hz | ASTMD150 | 3.17 |
| 60Hz | ASTMD150 | 3.17 |
| Hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell Hardness | M计秤 | ASTMD785 | 70 |
| R计秤 | ASTMD785 | 118 |
| Impact Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Notched Izod Impact Strength | -30°C | ISO180/1A | 10 kJ/m² |
| 23°C | ISO180/1A | 12 kJ/m² | |
| Instrumented Dart Impact | 23°C,EnergyatPeakLoad | ASTMD3763 | 63.0 J |
| Gardner Impact | 23°C | ASTMD3029 | 169 J |
| Tensile Impact Strength | ASTMD1822 | 577 kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top