PC LEXAN™ 923 SABIC INNOVATIVE SINGAPHORE
131
Unit Price:$2814 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High rigidity Weather resistance
- Application Areas:Communication equipment
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| density | -- | ASTMD792 | 1.21 | g/cm³ |
| -- | ASTMD792 | 1.22 | g/cm³ | |
| Specific volume | ASTMD792 | 0.835 | cm³/g | |
| Melt mass flow rate | 300°C/1.2kg | ASTMD1238 | 15 | g/10min |
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.50到0.70 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.15 | % |
| Equilibrium,23°C | ASTMD570 | 0.35 | % | |
| Equilibrium,100°C | ASTMD570 | 0.58 | % | |
| Outdoor applicability | UL746C | f1 |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Rockwell hardness | M-Scale | ASTMD785 | 70 | |
| R-Scale | ASTMD785 | 118 | ||
| tensile strength | Yield | ASTMD638 | 62.1 | Mpa |
| Break | ASTMD638 | 55.8 | Mpa | |
| elongation | Yield | ASTMD638 | 7.0 | % |
| Break | ASTMD638 | 90 | % | |
| Bending modulus | 50.0mmSpan | ASTMD790 | 2240 | Mpa |
| bending strength | Yield,50.0mmSpan | ASTMD790 | 91.0 | Mpa |
| Taber abraser | 1000Cycles,1000g,CS-17Wheel | ASTMD1044 | 10.0 | mg |
| Impact strength of cantilever beam gap | 23°C | ASTMD256 | 640 | J/m |
| Cantilever beam without notch impact strength | 23°C | ASTMD4812 | 3200 | J/m |
| Falling hammer impact | 23°C | ASTMD3029 | 169 | J |
| Tensile impact strength | ASTMD1822 | 525 | kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed,6.40mm | ASTMD648 | 138 | °C |
| 1.8MPa,Unannealed,6.40mm | ASTMD648 | 132 | °C | |
| vicat softening point | ASTMD15256 | 152 | °C | |
| Linear coefficient of thermal expansion | MD：-40to95°C | ASTME831 | 6.8E-05 | cm/cm/°C |
| thermal conductivity | ASTMC177 | 0.19 | W/m/K | |
| RTIElec | UL746 | 130 | °C | |
| RTI Imp | UL746 | 120 | °C | |
| RTI | UL746 | 130 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| High arc combustion index | HAI | UL746 | PLC2 | |
| High voltage arc tracing rate | HVTR | UL746 | PLC3 | |
| Hot wire ignition | HWI | UL746 | PLC1 | |
| Volume resistivity | ASTMD257 | >1.0E+17 | ohms·cm | |
| Dielectric strength | 3.20mm,inAir | ASTMD149 | 17 | KV/mm |
| Dielectric constant | 50Hz | ASTMD150 | 3.01 | |
| 60Hz | ASTMD150 | 3.01 | ||
| 1MHz | ASTMD150 | 2.96 | ||
| Dissipation factor | 50Hz | ASTMD150 | 9E-04 | |
| 60Hz | ASTMD150 | 9E-04 | ||
| 1MHz | ASTMD150 | 0.010 | ||
| Arc resistance | ASTMD495 | PLC7 | ||
| Compared to the anti leakage trace index | CTI | UL746 | PLC3 |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 1.47mm | UL94 | V-0 | |
| Extreme Oxygen Index | ASTMD2863 | 35 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top