PC LEXAN™ 121R SABIC INNOVATIVE US
132
Unit Price:$3745 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 55MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Material Certification
Technical Data Sheet
Material Description
- Material Properties:Low viscosity｜Flame retardant｜transparent
- Application Areas:Profile｜building materials
- Color:--
- Grade:Injection grade
Material Certification
Technical Data Sheet
Compare
| Physical | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Density / Specific Gravity | ASTMD792 | 1.20 g/cm³ | |
| Specific Volume | ASTMD792 | 0.835 cm³/g | |
| Density / Specific Gravity | ASTMD792 | 1.19 g/cm³ | |
| Melt Mass-Flow Rate | 300°C/1.2kg | ASTMD1238 | 18 g/10min |
| Modeling Shrinkage | MD：3.20mm | 内部方法 | 0.50to0.70 % |
| Moisture Absorption | 24hr | ASTMD570 | 0.15 % |
| 平衡,23°C | ASTMD570 | 0.35 % | |
| 平衡,100°C | ASTMD570 | 0.58 % | |
| Outdoor Suitability | UL746C | f2 |
| Thermal Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Evolution Calendar intelligent importer | UL746 | 130 °C | |
| RTIStr | UL746 | 130 °C | |
| Heat Deflection Temperature | 0.45MPa,未退火,6.40mm | ASTMD648 | 138 °C |
| 1.8MPa,未退火,6.40mm | ASTMD648 | 129 °C | |
| Vicat Softening Temperature | ASTMD15257 | 154 °C | |
| Linear thermal expansion coefficient | MD：-40到95°C | ASTME831 | 6.8E-05 cm/cm/°C |
| Specific Heat | ASTMC351 | 1260 J/kg/°C | |
| Thermal Conductivity | ASTMC177 | 0.25 W/m/K | |
| RTIElec | UL746 | 130 °C |
| Optical | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Haze | 2540µm | ASTMD1003 | 1.0 % |
| Transmittance | 2540µm | ASTMD1003 | 88.0 % |
| Index of Refraction | ASTMD542 | 1.586 |
| Flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flame Rating | 0.70mm | UL94 | HB |
| Radiant Panel Listing | UL | YES |
| Electrical Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dissipation Factor? | 60Hz | ASTMD150 | 9E-04 |
| 1MHz | ASTMD150 | 0.010 | |
| Comparative Tracking Index | CTI | UL746 | PLC 2 |
| High Amp Arc Ignition | HAI | UL746 | PLC 1 |
| High Voltage Arc Tracking Rate | HVTR | UL746 | PLC 2 |
| Dissipation Factor? | 50Hz | ASTMD150 | 9E-04 |
| Dielectric Constant | 60Hz | ASTMD150 | 3.17 |
| 1MHz | ASTMD150 | 2.96 | |
| Dielectric Strength | 3.20mm,inAir | ASTMD149 | 15 KV/mm |
| Dielectric Constant | 50Hz | ASTMD150 | 3.17 |
| Volume Resistivity | ASTMD257 | >1.0E+17 ohms·cm | |
| Hot-wire Ignition | HWI | UL746 | PLC 2 |
| Mechanical Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile Elongation | 断裂 | ASTMD638 | 130 % |
| Flexural Modulus | 50.0mm跨距 | ASTMD790 | 2340 Mpa |
| Flexural Strength | 屈服,50.0mm跨距 | ASTMD790 | 96.5 Mpa |
| Taber Abrasion Resistance | 1000Cycles,1000g,CS-17转轮 | ASTMD1044 | 10.0 mg |
| Tensile Strength | 屈服 | ASTMD638 | 62.1 Mpa |
| 断裂 | ASTMD638 | 68.9 Mpa | |
| Tensile Elongation | 屈服 | ASTMD638 | 7.0 % |
| Hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell Hardness | M计秤 | ASTMD785 | 70 |
| R计秤 | ASTMD785 | 118 |
| Impact Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | -30°C | ISO179/1eA | 12 kJ/m² |
| 23°C | ISO179/1eA | 65 kJ/m² | |
| Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | NoBreak |
| 23°C | ISO179/1eU | NoBreak | |
| Notched Izod Impact Strength | 23°C | ASTMD256 | 690 J/m |
| -30°C | ISO180/1A | 11 kJ/m² | |
| 23°C | ISO180/1A | 65 kJ/m² | |
| 23°C | ASTMD4812 | 3200 J/m | |
| Unnotched Izod Impact Strength | -30°C | ISO180/1U | NoBreak |
| 23°C | ISO180/1U | NoBreak | |
| Instrumented Dart Impact | 23°C,EnergyatPeakLoad | ASTMD3763 | 62.1 J |
| Gardner Impact | 23°C | ASTMD3029 | 169 J |
| Tensile Impact Strength | ASTMD1822 | 546 kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top