PPO NORYL™ V0150B SABIC INNOVATIVE US
140
Unit Price:$4412 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:Thermal stability Glass fiber reinforced
- Application Areas:medical care
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | MD：--2 | 内部方法 | 0.50to0.70 | % |
| MD：3.20mm | 内部方法 | 0.50to0.70 | % | |
| Water absorption rate | Saturation,23°C | ISO62 | 0.18 | % |
| Equilibrium,23°C,50%RH | ISO62 | 0.060 | % | |
| Melt Volume-Flow Rate (MVR) | 300°C/5.0kg | ISO1133 | 10.0 | cm3/10min |
| Melt mass flow rate | 280°C/5.0kg | ASTMD1238 | 3.5 | g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Bending strength 6, | ISO178 | 110 | Mpa | |
| Tensile modulus | ASTMD638 | 2500 | Mpa | |
| Bending modulus | ISO178 | 2400 | Mpa | |
| Suspended wall beam gap impact strength | -30°C | ISO180/1A | 5.0 | kJ/m² |
| 23°C | ISO180/1A | 13 | kJ/m² | |
| Dart impact equipped with measuring instruments | 23°C,TotalEnergy | ASTMD3763 | 50.0 | J |
| Impact strength of simply supported beam gap | -30°C | ISO179/1eA | 5.0 | kJ/m² |
| 23°C | ISO179/1eA | 14 | kJ/m² | |
| FlexuralStrength | Yield,50.0mmSpan | ASTMD790 | 105 | Mpa |
| Tensile strength | Yield | ASTMD638 | 70.0 | Mpa |
| Tensile modulus | ISO527-2/1 | 2500 | Mpa | |
| tensile strength | Yield | ISO527-2/50 | 70.0 | Mpa |
| Break | ASTMD638 | 60.0 | Mpa | |
| Break | ISO527-2/50 | 55.0 | Mpa | |
| elongation | Yield | ASTMD638 | 5.0 | % |
| Yield | ISO527-2/50 | 4.0 | % | |
| Break | ASTMD638 | 7.0 | % | |
| Break | ISO527-2/50 | 10 | % | |
| Bending modulus | 50.0mmSpan | ASTMD790 | 2550 | Mpa |
| Taber abraser | 1000Cycles,1000g,CS-17Wheel | 内部方法 | 35.0 | mg |
| Ball pressure hardness | H358/30 | ISO2039-1 | 113 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| RTI Imp | UL746 | 105 | °C | |
| Hot deformation temperature | 0.45MPa,Unannealed,100mmSpan | ISO75-2/Be | 140 | °C |
| 1.8MPa,Unannealed,3.20mm | ASTMD648 | 135 | °C | |
| 1.8MPa,Unannealed,100mmSpan | ISO75-2/Ae | 130 | °C | |
| Linear coefficient of thermal expansion | MD：-40to40°C | ASTME831 | 7.5E-05 | cm/cm/°C |
| MD：23to80°C | ISO11359-2 | 7E-05 | cm/cm/°C | |
| TD：-40to40°C | ASTME831 | 7.5E-05 | cm/cm/°C | |
| TD：23to80°C | ISO11359-2 | 9E-05 | cm/cm/°C | |
| vicat softening point | ASTMD152511 | 155 | °C | |
| -- | ISO306/A50 | 160 | °C | |
| -- | ISO306/B50 | 145 | °C | |
| -- | ISO306/B120 | 155 | °C | |
| RTIElec | UL746 | 110 | °C | |
| RTIStr | UL746 | 115 | °C | |
| thermal conductivity | ISO8302 | 0.27 | W/m/K | |
| Ball Pressure Test | 125°C | IEC60695-10-2 | Pass | |
| 140°C12 | IEC60695-10-2 | Pass |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Dissipation factor | 50Hz | IEC60250 | 9E-04 | |
| 60Hz | IEC60250 | 9E-04 | ||
| 1MHz | IEC60250 | 3E-03 | ||
| Dielectric strength | 0.800mm,in Oil | IEC60243-1 | 33 | KV/mm |
| 1.60mm,in Oil | IEC60243-1 | 26 | KV/mm | |
| 3.20mm,in Oil | IEC60243-1 | 16 | KV/mm | |
| Surface resistivity | IEC60093 | >1.0E+15 | ohms | |
| Volume resistivity | IEC60093 | 1E+15 | ohms·cm | |
| Relative permittivity | 50Hz | IEC60250 | 2.80 | |
| 60Hz | IEC60250 | 2.80 | ||
| 1MHz | IEC60250 | 2.70 | ||
| Leakage Trace Index | IEC60112 | 250 | V |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL94 | V-0 | |
| 2.0mm | UL94 | 5VA | ||
| Burning wire flammability index | 1.0mm | IEC60695-2-12 | 960 | °C |
| Extreme Oxygen Index | ISO4589-2 | 32 | % | |
| Hot filament ignition temperature | 1.0mm | IEC60695-2-13 | 775 | °C |
| 2.0mm | IEC60695-2-13 | 775 | °C | |
| 3.0mm | IEC60695-2-13 | 775 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top