برگه داده فنی
physical property | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
density | | ISO 1183 | 1.37 g/cm³ |
Water absorption rate | 23°C,24hr | ISO 62 | 0.40 % |
Water absorption rate | 饱和,23°C | ISO 62 | 0.60 % |
hardness | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
ball-indentation hardness | | ISO 2039-1 | 120 MPa |
Impact resistance | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Impact strength of cantilever beam gap | | ISO 180 | >4.0 kJ/m² |
Suspended wall beam without notch impact strength | | ISO 180 | 无断裂 |
Mechanical properties | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
tensile strength | Break | ISO 527-2 | 125 MPa |
Tensile strain | Break | ISO 527-2 | >50 % |
Flexural modulus | | ISO 178 | 3500 MPa |
compression stress | 5%应变 | ISO 604 | 56.0 MPa |
compression stress | 10%应变 | ISO 604 | 88.0 MPa |
compression stress | 20%应变 | ISO 604 | 95.0 MPa |
coefficient of friction | Steel - Dynamic | ASTM D1894 | 0.020to0.080 |
coefficient of friction | Steel - Static | ASTM D1894 | 0.24to0.28 |
tensile strength | Yield | ISO 527-2 | 74.0 MPa |
Electrical performance | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Surface Resistivity | | IEC 60093 | 5E+12 ohms |
dielectric strength | | IEC 60243-1 | 90 kV/mm |
dielectric constant | | IEC 60250 | 3.60 |
Dissipation Factor | | IEC 60250 | 0.019 |
Thermal performance | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ISO 75-2/A | 74.0 °C |
melting temperature | | ISO 3146 | 255 °C |
Linear coefficient of thermal expansion | MD:20到100°C | ISO 11359-2 | 8E-05 cm/cm/°C |
specific heat | | ASTMC351 | 1050 J/kg/°C |
thermal conductivity | | ISO 8302 | 0.21 W/m/K |
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.