
ABS 150E本色 Hongyun Polymer
ویژگیها:
Flame retardant high flow high gloss heat-resistant UV resistant melt quality flow rate detection conditions adopt 220 ℃ 10kg load with good comprehensive flame retardant performance
کاربردهای معمول:
Suitable for various flame retardant TV housings heaters ovens electric shock absorbers shredders printers audio panels electrical products sockets power conversion housings switch sockets and automotive accessories for communication equipment
توصیف محصول
گواهینامهها(0)
جدول خواص
توصیف محصول
| کاربردهای معمول: | Suitable for various flame retardant TV housings | heaters | ovens | electric shock absorbers | shredders | printers | audio panels | electrical products | sockets | power conversion housings | switch sockets | and automotive accessories for communication equipment |
| ویژگیها: | Flame retardant | high flow | high gloss | heat-resistant | UV resistant | melt quality flow rate detection conditions adopt 220 ℃ | 10kg load | with good comprehensive flame retardant performance |
گواهینامهها
No Data...
برگه داده فنی
| mechanical properties | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
|---|---|---|---|---|
| Bending modulus | GB/T9341-2008 | 3015 | MPa | |
| elongation | Break | GB/T1040.2-2006 | 2.0 | % |
| tensile strength | GB/T1040.2-2006 | 39.3 | MPa | |
| bending strength | GB/T9341-2008 | 72.6 | MPa | |
| Tensile stress | Break | GB/T1040.2-2006 | 35.0 | MPa |
| Impact strength of cantilever beam gap | GB/T1843/A-2008 | 11 | KJ/m2 | |
| thermal performance | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| UL flame retardant rating | 1.6mm | UL 94-2012 | V-0 | |
| Hot deformation temperature | HDT | GB/T1634.1-2004 | 89.0 | ℃ |
| Physical properties | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| melt mass-flow rate | GB/T3682-2000 | 49 | g/10min |
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.