
HDPE K46-06-185 Ineos
ویژگیها:
Anti alcohol anti fuel good formability high cracking (stress crack resistance) high molecular weight low temperature impact resistance
کاربردهای معمول:
Special materials for automotive fuel tanks
توصیف محصول
گواهینامهها(0)
جدول خواص
توصیف محصول
| کاربردهای معمول: | Special materials for automotive fuel tanks |
| ویژگیها: | Anti alcohol | anti fuel | good formability | high cracking (stress crack resistance) | high molecular weight | low temperature impact resistance |
گواهینامهها
No Data...
برگه داده فنی
| Basic Performance | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
|---|---|---|---|---|
| density | ISO 1183/A | 0.946 | ||
| melt mass-flow rate | 190℃/21.6kg | ISO 1133 | 4.2 | g/10min |
| mechanical properties | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| Shore hardness | Shore D,23℃ | ISO 868 | 61 | |
| Tensile modulus | 23℃ | ISO 527-2 | 1200 | MPa |
| Tensile stress | 23℃ | ISO 527-2 | 24 | MPa |
| Environmental stress cracking resistance | 50℃,100% Antarox | ASTM D-1693A | >500 | hr |
| Tensile strain | 23℃,Break | ISO 527-2 | >500 | % |
| Impact strength of cantilever beam gap | -40℃ | ISO 180/1A | 32 | kJ/m |
| 23℃ | ISO 180/1A | 62 | kJ/m | |
| thermal performance | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| Vicat softening temperature | ISO 306/A | 128 | ℃ | |
| Linear coefficient of thermal expansion | Flow | ASTM D-696 | 0.000013 | cm/cm/℃ |
| thermal conductivity | 23℃ | ISO 8302 | 0.44 | W/m/K |
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.