
PA66/6 ADDINYL C2 V30 ADDIPLAST FRANCE
ویژگیها:
Filler glass fiber reinforced material 30% filler by weight
کاربردهای معمول:
Automotive internal components applications in the automotive industry electrical and electronic applications home appliance components and casings
توصیف محصول
گواهینامهها(0)
جدول خواص
توصیف محصول
| کاربردهای معمول: | Automotive internal components | applications in the automotive industry | electrical and electronic applications | home appliance components | and casings |
| ویژگیها: | Filler | glass fiber reinforced material | 30% | filler by weight |
گواهینامهها
No Data...
برگه داده فنی
| impact performance | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
|---|---|---|---|---|
| Charpy Notched Impact Strength | kJ/m² | 10 | 18 | |
| Impact strength of simply supported beam without notch | kJ/m² | 60 | 75 | |
| Impact strength of cantilever beam gap | kJ/m² | 12 | 21 | |
| mechanical properties | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| tensile strength | Break | MPa | 175 | 115 |
| Tensile strain | Break | % | 4.0 | 6.0 |
| Bending modulus | MPa | 8100 | 4700 | |
| thermal performance | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| Hot deformation temperature | 1.8MPa,Unannealed | °C | 230 | -- |
| Melting temperature | °C | 243 | -- | |
| Linear coefficient of thermal expansion | MD | cm/cm/°C | 3.5E-05 | -- |
| Physical properties | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| density | g/cm³ | 1.37 | -- | |
| Electrical performance | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| Volume resistivity | ohms·cm | 1E+15 | 1E+12 | |
| Dielectric strength | kV/mm | 35 | 30 | |
| Compared to the anti leakage trace index | SolutionA | V | PLC 1 | |
| hardness | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| Shore hardness | ShoreD | 84 | 78 |
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.