برگه داده فنی
| physical property | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|
| density | | ASTM D792 | 0.930 g/cm³ |
| Crystallinity | 762.0µm | ASTM D3417 | 48 % |
| Crystallinity | 1.52mm | ASTM D3417 | 47 % |
| Crystallinity | 3.18mm | ASTM D3417 | 50 % |
| relative viscosity | 762.0µm | ASTM D4020 | 230to350 cm³/g |
| relative viscosity | 1.52mm | ASTM D4020 | 230to350 cm³/g |
| relative viscosity | 3.18mm | ASTM D4020 | 230to350 cm³/g |
| hardness | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|
| Shore hardness | 邵氏D,0.762mm | ASTM D2240 | 65 |
| Shore hardness | 邵氏D,1.52mm | ASTM D2240 | 65 |
| Shore hardness | 邵氏D,3.18mm | ASTM D2240 | 65 |
| Mechanical properties | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|
| coefficient of friction | 与钢-动态4 | ASTM D1894 | 0.050to0.10 |
| Tensile modulus | 0.762mm | ASTM D638 | 725 MPa |
| Tensile modulus | 1.52mm | ASTM D638 | 731 MPa |
| Tensile modulus | 3.18mm | ASTM D638 | 672 MPa |
| tensile strength | 屈服,0.762mm | ASTM D638 | 23.0 MPa |
| coefficient of friction | 与钢-动态5 | ASTM D1894 | 0.050to0.080 |
| coefficient of friction | 与自身-动态2 | ASTM D1894 | 0.14 |
| coefficient of friction | 与自身-动态6 | ASTM D1894 | 0.13 |
| coefficient of friction | 与自身-动态7 | ASTM D1894 | 0.14 |
| coefficient of friction | 与自身-静态2 | ASTM D1894 | 0.16 |
| coefficient of friction | 与自身-静态6 | ASTM D1894 | 0.16 |
| coefficient of friction | 与自身-静态7 | ASTM D1894 | 0.16 |
| elongation | 断裂,0.762mm | ASTM D638 | 60 % |
| elongation | 断裂,1.52mm | ASTM D638 | 460 % |
| elongation | 断裂,3.18mm | ASTM D638 | 470 % |
| coefficient of friction | 与钢-动态3 | ASTM D1894 | 0.10to0.22 |
| tensile strength | 屈服,1.52mm | ASTM D638 | 20.0 MPa |
| tensile strength | 屈服,3.18mm | ASTM D638 | 22.0 MPa |
| tensile strength | 断裂,0.762mm | ASTM D638 | 53.0 MPa |
| tensile strength | 断裂,1.52mm | ASTM D638 | 49.0 MPa |
| tensile strength | 断裂,3.18mm | ASTM D638 | 44.0 MPa |
| Impact resistance | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 80 J/m |
| Electrical performance | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|
| Surface Resistivity | 0.762mm | ASTM D257 | 1E+03 ohms |
| dielectric constant | 1.52mm | ASTM D150 | 2.45 |
| dielectric constant | 3.18mm | ASTM D150 | 2.54 |
| Dissipation Factor | 0.762mm,50Hz | ASTM D150 | 0.059 |
| Dissipation Factor | 0.762mm,10kHz | ASTM D150 | 0.11 |
| Dissipation Factor | 0.762mm,5MHz | ASTM D150 | 0.10 |
| Dissipation Factor | 1.52mm,50Hz | ASTM D150 | 0.021 |
| Dissipation Factor | 1.52mm,10kHz | ASTM D150 | 0.069 |
| Dissipation Factor | 1.52mm,5MHz | ASTM D150 | 0.23 |
| Dissipation Factor | 3.18mm,50Hz | ASTM D150 | 8.2E-03 |
| Dissipation Factor | 3.18mm,10kHz | ASTM D150 | 2.2E-03 |
| Dissipation Factor | 3.18mm,5MHz | ASTM D150 | 3.4E-03 |
| Surface Resistivity | 1.52mm | ASTM D257 | 1E+03 ohms |
| Surface Resistivity | 3.18mm | ASTM D257 | 1E+03 ohms |
| Volume resistivity | 0.762mm | ASTM D257 | 6E+07 ohms·cm |
| Volume resistivity | 1.52mm | ASTM D257 | 1.5E+07 ohms·cm |
| Volume resistivity | 3.18mm | ASTM D257 | >2.0E+7 ohms·cm |
| dielectric strength | 3.18mm | ASTM D149 | 14 kV/mm |
| dielectric constant | 0.762mm | ASTM D150 | 2.48 |
| StaticDecay | 762.0µm | | <10 msec |
| StaticDecay | 1.52mm | | <10 msec |
| StaticDecay | 3.18mm | | <10 msec |
| Thermal performance | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|
| Linear coefficient of thermal expansion | MD：-100到-20°C,3.18mm | ASTM D696 | 9.2E-04 cm/cm/°C |
| Linear coefficient of thermal expansion | MD：20到100°C,3.18mm | ASTM D696 | 1.5E-04 cm/cm/°C |
| melting temperature | --6 | | 134 °C |
| melting temperature | --2 | | 136 °C |
نکات مهم: Plas.com داده‌های برگه فنی را از تولیدکنندگان مواد جمع‌آوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت داده‌ها انجام می‌دهد، اما هیچ مسئولیتی در قبال داده‌ها ندارد. اکیداً توصیه می‌شود که صحت داده‌ها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.
مقایسه