برگه داده فنی
physical property | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Water absorption rate | 饱和,23°C | % | 7.0 -- |
density | | g/cm³ | 1.15 -- |
Water absorption rate | 23°C,24hr | % | 2.2 -- |
hardness | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
ball-indentation hardness | | MPa | 160 125 |
Mechanical properties | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
compression stress | 10%应变 | MPa | 63.0 -- |
compression stress | 20%应变 | MPa | 90.0 -- |
Tensile modulus | | MPa | 3700 2800 |
tensile strength | Yield | MPa | 85.0 65.0 |
tensile strength | Break | MPa | 140 60.0 |
Tensile strain | Break | % | >25 -- |
Flexural modulus | | MPa | 3300 2500 |
compression stress | 5%应变 | MPa | 39.0 -- |
coefficient of friction | Steel - Static | | 0.35 0.42 |
coefficient of friction | Steel - Dynamic | | 0.040 0.080 |
Impact resistance | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Impact strength of cantilever beam gap | | kJ/m² | >3.5 >15 |
Suspended wall beam without notch impact strength | | | 无断裂 |
Electrical performance | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Surface Resistivity | | ohms | 1E+12 1E+10 |
dielectric strength | | kV/mm | 50 20 |
dielectric constant | | | 3.70 -- |
Dissipation Factor | | | 0.030 -- |
Thermal performance | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Linear coefficient of thermal expansion | MD:20到100°C | cm/cm/°C | 7.0E-5到8.0E-5 -- |
Heat distortion temperature | 0.45MPa,未退火,HDT | °C | 210 -- |
Heat distortion temperature | 1.8MPa,未退火,HDT | °C | 120 -- |
melting temperature | | °C | 220 -- |
specific heat | | J/kg/°C | 1670 -- |
thermal conductivity | | W/m/K | 0.25 -- |
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.