
ABS FN-800W Beijing Hua Ao
ویژگیها:
It has the characteristics of rigidity good toughness balance good fluidity low injection temperature good resistance to melt dripping good dimensional stability and high cost-effectiveness
کاربردهای معمول:
Suitable for making electrical casings automotive parts
توصیف محصول
گواهینامهها(0)
جدول خواص
توصیف محصول
| کاربردهای معمول: | Suitable for making electrical casings | automotive parts |
| ویژگیها: | It has the characteristics of rigidity | good toughness balance | good fluidity | low injection temperature | good resistance to melt dripping | good dimensional stability | and high cost-effectiveness |
گواهینامهها
No Data...
برگه داده فنی
| Other performance | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
|---|---|---|---|---|
| UL combustion rating | 垂直 | 无滴落 | ||
| Parallel combustion | 无滴落 | |||
| Basic Performance | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| melt mass-flow rate | 200℃,5kg | ≥5 | g/10min | |
| mechanical properties | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| Impact strength of cantilever beam gap | ≥15 | KJ/m | ||
| bending strength | ≥65 | MPa | ||
| Bending modulus | ≥2400 | MPa | ||
| tensile strength | ≥45 | MPa | ||
| Elongation at Break | ≥8 | % | ||
| thermal performance | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| Hot deformation temperature | 0.46MPa | ≥82 | ℃ | |
| UL flame retardant rating | V-0级 | UL 94 |
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.