برگه داده فنی
Cured Properties | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
tensile strength | | ASTM D412 | 3.45to3.62 MPa |
elongation | Break | ASTM D412 | 280to330 % |
tear strength | | ASTM D624 | 19.3to22.8 kN/m |
dielectric strength | | | 20 kV/mm |
relative permittivity | 100Hz | | 3.30 |
Volume resistivity | | | 1E+15 ohms·cm |
Dissipation Factor | 100Hz | | 0.019 |
Coverage-Cured | | | 0.918 cm³/g |
Shore hardness | ShoreA4 | | 24to32 |
Shore hardness | ShoreA5 | | 28to36 |
thermosetting | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Thermosetting components | Hardener | | 按容量计算的混合比:11按重量计算的混合比:1.0 |
Thermosetting components | Shelf Life | | 26 wk |
Thermosetting components | 热固性混合粘度 | | 30000to45000 cP |
Thermosetting components | Resin | | 按容量计算的混合比:100按重量计算的混合比:10 |
Uncured Properties | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Color | --2 | | Blue |
Color | --3 | | White |
Viscosity | --2 | | 0.30to0.40 Pa·s |
Viscosity | --3 | | 50to70 Pa·s |
Viscosity | 固化时间 | | 16to18 hr |
Viscosity | Pot Life | | 90to150 min |
physical property | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
density | | | 1.09 g/cm³ |
Shrinkage rate | 固化后 | | 0.10 % |
Thermal performance | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Usage temperature | 固化后 | | -51-177 °C |
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.