
MPPO M109-G20 North Chemical Institute
ویژگیها:
Injection grade flame-retardant reinforcement material alloy composed of PPO and styrene based polymer reinforced with 20% fiberglass. This product has the characteristics of high strength low warpage good heat resistance and dimensional stability
کاربردهای معمول:
Suitable for shells that require flame retardancy heat resistance and high rigidity such as wire frames axial fan blades relay boxes insulation pillars textile yarn tubes etc
توصیف محصول
گواهینامهها(0)
جدول خواص
توصیف محصول
| کاربردهای معمول: | Suitable for shells that require flame retardancy | heat resistance | and high rigidity | such as wire frames | axial fan blades | relay boxes | insulation pillars | textile yarn tubes | etc |
| ویژگیها: | Injection grade | flame-retardant reinforcement material | alloy composed of PPO and styrene based polymer | reinforced with 20% fiberglass. This product has the characteristics of high strength | low warpage | good heat resistance and dimensional stability |
گواهینامهها
No Data...
برگه داده فنی
| processability | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
|---|---|---|---|---|
| Spiral flow length | 18 | cm | ||
| Shrinkage rate | ISO 294-4 | 0.2-0.4 | % | |
| mechanical properties | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| tensile strength | ISO 527 | 95 | MPa | |
| elongation | Break | ISO 527 | 4.0-6.0 | % |
| bending strength | ISO 178 | 130 | MPa | |
| Bending modulus | ISO 178 | 4.95*103 | MPa | |
| Charpy Notched Impact Strength | Notched | ISO 179(leA) | 12 | KJ/m2 |
| thermal performance | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| Hot deformation temperature | 1.82MPa | ISO 75f | 135 | ℃ |
| Physical properties | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| Water absorption rate | 23℃,24hr | ISO 62 | 0.07 | % |
| density | ISO 1183 | 1.25 | g/cm3 | |
| Electrical performance | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| ash content | 20 | % | ||
| Dielectric constant | 106HZ | IEC 60250 | 3 | |
| Arc resistance | IEC 61621 | -- | Sec | |
| Dielectric strength | IEC 60243 | 33 | KV/m | |
| Volume resistivity | IEC 60093 | 1*1014 | Ω。m | |
| Dielectric loss | 106HZ,Tangent | IEC 60250 | 3.0*10-3 | |
| flame retardant performance | شرایط آزمون | روش آزمون | نتیجه آزمون | واحد آزمایش |
| UL flame retardant rating | UL 94 | V-1 |
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.