HDPE 1000-B160C Beiqing Lianke

0
  • ویژگی‌ها:
    Features: While maintaining its original performance
    it greatly improves flowability
    especially in the fields of anti-corrosion
    wear resistance
    self-lubrication
    etc. It can replace fluoroplastics such as polytetrafluoroethylene. 1. It can continuously and quickly extrude wear-resistant slide rails
    profiles
    sheets
    pipelines on ordinary extruders. 2. It can inject self-lubricating wear-resistant shaft sleeves
    conveyor belt idlers
    slides
    anti-corrosion pumps
    valves
    impellers
    pump shells on ordinary injection machines. 3
  • کاربردها:
    Suitable for injection
    extrusion
    compression

برگه داده فنی

Basic performanceشرایط آزمونروش آزموننتیجه آزمون
density0.945 g/cm3
melt mass-flow rate230℃,5Kg0.50 g/10min
Mechanical propertiesشرایط آزمونروش آزموننتیجه آزمون
Flexural modulus800-1000 MPa
elongation at break>340
Impact strength of cantilever beam gap56.6 KJ/m2
Charpy Notched Impact Strength110 KJ/m2
bending strength15.2 MPa
Shore hardness57
tensile strength 24.6 MPa
Other performanceشرایط آزمونروش آزموننتیجه آزمون
Wear factor沙浆法0.25
Thermal performanceشرایط آزمونروش آزموننتیجه آزمون
brittle temperature-80
Heat distortion temperature4.6Kg/cm2,HDT78
نکات مهم: Plas.com داده‌های برگه فنی را از تولیدکنندگان مواد جمع‌آوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت داده‌ها انجام می‌دهد، اما هیچ مسئولیتی در قبال داده‌ها ندارد. اکیداً توصیه می‌شود که صحت داده‌ها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.

تماس با ما

دریافت اپلیکیشن

Top