برگه داده فنی
physical property | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
density | | g/cm³ | 1.16 -- |
Water absorption rate | 23°C,24hr | % | 2.2 -- |
Water absorption rate | 饱和,23°C | % | 7.0 -- |
hardness | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
ball-indentation hardness | | MPa | 175 150 |
Mechanical properties | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Tensile strain | Break | % | >15 -- |
Flexural modulus | | MPa | 3700 2800 |
compression stress | 10%应变 | MPa | 66.0 -- |
compression stress | 20%应变 | MPa | 91.0 -- |
coefficient of friction | Steel - Dynamic | | 0.040 0.080 |
coefficient of friction | Steel - Static | | 0.35 -- |
Tensile modulus | | MPa | 3800 3000 |
tensile strength | Yield | MPa | 110 80.0 |
tensile strength | Break | MPa | 150 70.0 |
compression stress | 5%应变 | MPa | 46.0 -- |
Impact resistance | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Impact strength of cantilever beam gap | | kJ/m² | >2.5 >12 |
Suspended wall beam without notch impact strength | | | 无断裂 |
Electrical performance | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Surface Resistivity | | ohms | 1E+12 1E+10 |
dielectric strength | | kV/mm | 50 20 |
dielectric constant | | | 3.70 -- |
Dissipation Factor | | | 0.030 -- |
Thermal performance | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
specific heat | | J/kg/°C | 1670 -- |
thermal conductivity | | W/m/K | 0.25 -- |
Heat distortion temperature | 0.45MPa,未退火,HDT | °C | 210 -- |
Heat distortion temperature | 1.8MPa,未退火,HDT | °C | 120 -- |
melting temperature | | °C | 220 -- |
Linear coefficient of thermal expansion | MD:20到100°C | cm/cm/°C | 7.0E-5到8.0E-5 -- |
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.