برگه داده فنی
physical property | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
density | | g/cm³ | 1.14 -- |
Water absorption rate | 23°C,24hr | % | 2.5to3.0 -- |
Water absorption rate | 饱和,23°C | % | 8.5to10 -- |
hardness | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
ball-indentation hardness | | MPa | 160 50.0 |
Mechanical properties | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Tensile modulus | | MPa | 3200 1800 |
tensile strength | Yield | MPa | 80.0 42.0 |
tensile strength | Break | MPa | 130 40.0 |
Tensile strain | Break | % | >50 >160 |
Flexural modulus | | MPa | 2500 1400 |
coefficient of friction | Steel - Dynamic | | 0.040 0.080 |
coefficient of friction | Steel - Static | | 0.38 0.42 |
Impact resistance | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Impact strength of cantilever beam gap | | | 无断裂 |
Suspended wall beam without notch impact strength | | | 无断裂 |
Electrical performance | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Surface Resistivity | | ohms | 1E+12 1E+10 |
dielectric strength | | kV/mm | 50 20 |
dielectric constant | | | 3.70 7.00 |
Dissipation Factor | | | 0.031 0.30 |
Thermal performance | شرایط آزمون | روش آزمون | نتیجه آزمون |
---|
Heat distortion temperature | 1.8MPa,未退火,HDT | °C | 95.0 -- |
melting temperature | | °C | 220 -- |
Linear coefficient of thermal expansion | MD:20到100°C | cm/cm/°C | 7.0E-5到1.0E-4 -- |
specific heat | | J/kg/°C | 1670 -- |
thermal conductivity | | W/m/K | 0.23 -- |
Heat distortion temperature | 0.45MPa,未退火,HDT | °C | 190 -- |
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.