مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PA66 A3X3G7 BK23187 BASF GERMANY
Ultramid®
کاربردهای الکتریکی,قطعات الکتریکی
عملکرد الکتریکی,عقب نشینی,قدرت بالا,مقاوم در برابر روغن,سختی بالا
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | BASF GERMANY/A3X3G7 BK23187 |
---|---|---|---|
Hot deformation temperature | 0.45MPa负荷,Dry | 250 °C | |
1.8MPa负荷,Dry | 250 °C | ||
Linear coefficient of thermal expansion | (23-80)℃,Dry | 1.5-2/6-7 | |
Maximum operating temperature | 220 °C | ||
specific heat | Dry | 1.4 J/(g.K) | |
Temperature index | 在20000h/5000h,后拉伸强度下降50%时 | 138/157 °C | |
thermal conductivity | Dry | 0.34 W/(m.K) |
mechanical properties | شرایط آزمون | روش آزمون | BASF GERMANY/A3X3G7 BK23187 |
---|---|---|---|
Ball Pressure Test | 干/湿 | 210 Mpa | |
Bending modulus | 干/湿 | 9200 Mpa | |
Charpy Notched Impact Strength | +23℃,干/湿 | 70/70 KJ/m | |
30℃,干 | 65 KJ/m | ||
elongation | ≤0.5%, +23℃,湿 | 4250 Mpa | |
Elongation at Break | 干/湿,V=50mm/min | 3/4 % | |
Fracture stress (V=50mm/min) | 干/湿 | 160/120 Mpa | |
impact strength | 干/湿 | 2/10 J | |
Impact strength of cantilever beam gap | +23℃,干/湿 | 13/20 KJ/m | |
Tensile creep modulus | 1000h,湿 | 4250 Mpa | |
Tensile modulus | 干/湿 | 11000/8500 Mpa | |
Tensile yield stress (V=50mm/min) | 干/湿 | 160/120 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | BASF GERMANY/A3X3G7 BK23187 |
---|---|---|---|
Compared to the Leakage Traceability Index (CTI) | 干/湿 | CTI 600 | |
Dielectric constant | 1MHz,干/湿 | 3.6/5 | |
Dielectric strength | K20/P50,干/湿 | 70/40 KV/mm | |
Loss angle | 1MHz,干/湿 | 0.02/0.2 | |
Surface resistivity | 干/湿 | >10 Ω | |
Volume resistivity | 干/湿 | 10 Ω.cm |