مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PA66 A3 HHR GF33 BK9005 NILIT SUZHOU
--
کاربردهای صنعتی,زمینه خودرو
افزایش,ثبات حرارتی
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | NILIT SUZHOU/A3 HHR GF33 BK9005 |
---|---|---|---|
Ball Pressure Test | 125°C | IEC 60695-10-2 | 通过 |
165°C | IEC 60695-10-2 | 通过 | |
Continuous use temperature | IEC 60216 | 130 °C | |
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 260 °C |
1.8MPa,Unannealed | ISO 75-2/A | 250 °C |
mechanical properties | شرایط آزمون | روش آزمون | NILIT SUZHOU/A3 HHR GF33 BK9005 |
---|---|---|---|
Tensile modulus | 23°C | ISO 527-2 | 9800 Mpa |
Tensile strain | Break,23°C | ISO 527-2 | 2.5 % |
tensile strength | Yield,23°C | ISO 527-2 | 160 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | NILIT SUZHOU/A3 HHR GF33 BK9005 |
---|---|---|---|
Compared to the anti leakage trace index | 3.20mm,SolutionA | IEC 60112 | PLC 1 |
Dielectric strength | 2.00mm | IEC 60243-1 | 21 KV/mm |
Surface resistivity | IEC 60093 | 1E+13 ohms | |
Volume resistivity | 23°C | IEC 60093 | 1E+15 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | NILIT SUZHOU/A3 HHR GF33 BK9005 |
---|---|---|---|
Shrinkage rate | TD:23°C | ISO 294-4 | 0.75 % |
MD:23°C | ISO 294-4 | 0.40 % | |
Water absorption rate | Saturation,23°C | ISO 62 | 5.0 % |
23°C,24hr | ISO 62 | 0.70 % |
impact performance | شرایط آزمون | روش آزمون | NILIT SUZHOU/A3 HHR GF33 BK9005 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 50 kJ/m² |
flammability | شرایط آزمون | روش آزمون | NILIT SUZHOU/A3 HHR GF33 BK9005 |
---|---|---|---|
Burning wire flammability index | 0.8mm | IEC 60695-2-12 | 650 °C |
3.2mm | IEC 60695-2-12 | 650 °C | |
Extreme Oxygen Index | ISO 4589-2 | 23 % | |
UL flame retardant rating | 3.2mm | UL 94 | HB |
0.8mm | UL 94 | HB | |
1.6mm | UL 94 | HB |