مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PA6 B3U30G4 BASF GERMANY
Ultramid®
کاربردهای الکتریکی,ماشین آلات صنعتی
عقب نشینی,مقاوم در برابر روغن,بدون هالوژن
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | BASF GERMANY/B3U30G4 |
---|---|---|---|
Hot deformation temperature | Unannealed0.45MPa | ISO 75 | 190 °C |
Linear coefficient of thermal expansion | Flow | ISO 11359 | 0.0000325 cm/cm/℃ |
Melting temperature | ISO 11357 | 220 °C | |
Vicat softening temperature | 50℃/hr ION | ISO 306 | 210 °C |
mechanical properties | شرایط آزمون | روش آزمون | BASF GERMANY/B3U30G4 |
---|---|---|---|
Charpy Notched Impact Strength | 23℃ | ISO 179 | (60干态)(105湿态) kJ/m² |
elongation | 23℃ | ISO 527 | (3.5干态)(17湿态) % |
Tensile creep modulus | 1hr | ISO 899 | (2500湿态) Mpa |
Tensile modulus | 23℃ | ISO 527 | (5800干态)(3500湿态) Mpa |
tensile strength | 23℃ | ISO 527 | (130干态)(70湿态) Mpa |
Electrical performance | شرایط آزمون | روش آزمون | BASF GERMANY/B3U30G4 |
---|---|---|---|
Accumulation resistor | IEC 60093 | 10000000000 Ω.cm | |
Compared to the anti leakage trace index | IEC 60112 | PLC 1 | |
Dielectric constant | 1MHz | IEC 60250 | 3.8 |
Dielectric strength | IEC 60243 | 17 KV/mm | |
ASTM D149 | 17 KV/mm | ||
Dissipation factor | 1MHz | IEC 60250 | 0.025 |
Volume resistivity | ASTM D257 | 10000000000 Ω.cm |
Physical properties | شرایط آزمون | روش آزمون | BASF GERMANY/B3U30G4 |
---|---|---|---|
density | ISO 1183 | 1.23 g/c㎥ | |
melt mass-flow rate | 275℃ 5kg | ISO 1133 | 55 c㎥/10min |
Shrinkage rate | Flow | ISO 294 | 0.6 % |
Water absorption rate | 23℃50RH | ISO 62 | 2.6 % |
23℃Saturation | ISO 62 | 8 % |