مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

LCP A625 CELANESE USA
VECTRA®
ابزار الکتریکی,قطعات لوازم خانگی,کاربردهای خودرو
بدون هالوژن,عقب نشینی,مقاوم در برابر پوشیدن
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
hardness | شرایط آزمون | روش آزمون | CELANESE USA/A625 |
---|---|---|---|
Rockwell hardness | M-Scale | ISO 2039-2 | 62 |
thermal performance | شرایط آزمون | روش آزمون | CELANESE USA/A625 |
---|---|---|---|
Hot deformation temperature | 8.0MPa,Unannealed | ISO 75-2/C | 114 °C |
0.45MPa,Unannealed | ISO 75-2/B | 225 °C | |
1.8MPa,Unannealed | ISO 75-2/A | 185 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 3E-05 cm/cm/°C |
MD | ISO 11359-2 | 9E-06 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 280 °C | |
Vicat softening temperature | ISO 306/B50 | 159 °C |
mechanical properties | شرایط آزمون | روش آزمون | CELANESE USA/A625 |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 10500 Mpa |
bending strength | 23°C | ISO 178 | 140 Mpa |
Compressive modulus | ISO 604 | 9000 Mpa | |
CompressiveStress | 1%Strain | ISO 604 | 56.0 Mpa |
Tensile creep modulus | 1hr | ISO 899-1 | 9800 Mpa |
1000hr | ISO 899-1 | 7500 Mpa | |
Tensile modulus | ISO 527-2/1A/1 | 9000 Mpa | |
Tensile strain | Break | ISO 527-2/1A/5 | 5.7 % |
tensile strength | Break | ISO 527-2/1A/5 | 140 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | CELANESE USA/A625 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 3 | |
Dissipation factor | 1MHz | IEC 60250 | 0.15 |
100Hz | IEC 60250 | 0.040 | |
Relative permittivity | 100Hz | IEC 60250 | 30.0 |
1MHz | IEC 60250 | 13.0 | |
Surface resistivity | IEC 60093 | 1E+11 ohms | |
Volume resistivity | IEC 60093 | 1E+16 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | CELANESE USA/A625 |
---|---|---|---|
Shrinkage rate | MD | ISO 294-4 | 0.10 % |
TD | ISO 294-4 | 0.50 % | |
Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.030 % |
impact performance | شرایط آزمون | روش آزمون | CELANESE USA/A625 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 67 kJ/m² |
Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 62 kJ/m² |
flammability | شرایط آزمون | روش آزمون | CELANESE USA/A625 |
---|---|---|---|
UL flame retardant rating | UL 94 | V-0 |