مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PBT 7407 JAPAN POLYPLASTIC
DURANEX®
قطعات الکترونیکی,کاربردهای خودرو
تقویت فیبر شیشه ای,بسته بندی: فیبر شیشه ای م,40 درصد پر کردن بر اساس و
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
hardness | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/7407 |
---|---|---|---|
Rockwell hardness | M-Scale | ISO 2039-2 | 85 |
Supplementary Information | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/7407 |
---|---|---|---|
ColourNumber | EF2001/ED3002 |
thermal performance | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/7407 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 200 °C |
Linear coefficient of thermal expansion | MD:23to55°C | Internal Method | 2E-05 cm/cm/°C |
TD:23to55°C | Internal Method | 5E-05 cm/cm/°C |
mechanical properties | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/7407 |
---|---|---|---|
Bending modulus | ISO 178 | 9500 Mpa | |
bending strength | ISO 178 | 180 Mpa | |
Tensile strain | Break | ISO 527-2 | 2.5 % |
tensile strength | ISO 527-2 | 117 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/7407 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 2 | |
Dielectric strength | 3.00mm | IEC 60243-1 | 26 KV/mm |
Volume resistivity | IEC 60093 | 3E+15 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/7407 |
---|---|---|---|
density | ISO 1183 | 1.57 g/cm³ | |
Water absorption rate | 23°C,24hr | ISO 62 | 0.10 % |
impact performance | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/7407 |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 8.8 kJ/m² |
flammability | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/7407 |
---|---|---|---|
UL flame retardant rating | UL 94 | HB |